Critical Heat Flux in Forced Convective Subcooled Boiling with a Plane Jet (Revised correlation) 2000
Critical Heat Flux during Natural Circulation Boiling of Saturated Liquid in Annulus with Heated
Outer Tube 2000
平面噴流沸騰系の限界熱流束 2000
Analytical Method in Inverse Heat Transfer Problem Using Laplace Transform Technique 2000
Enhancement of CHF in Open Thermosyphon with Heated Bottom Chamber 2000
1次元非定常温度場を用いた境界値同定の解析的解法(第2種、第3種境界値問題への適用) 2000
1次元熱伝導逆問題解を用いた熱物性値の推定法 2000
Heat Transfer during Transient Cooling of High Temperature Surface with an Impinging Jet 2000
限界熱流束研究の進展 1999
Critical Heat Flux in Forced Convective Subcooled Boiling with a Plane Jet (Effect of subcooling on CHF)
Convective Flow and Pool Boiling (edited by F. Mayinger et al.) 1999
垂直二重円管内自然対流沸騰系の限界熱流束(外管加熱と内管加熱による特性の相違について) 1999
Critical Heat Flux during Natural Circulation Boiling on Uniformly Heated Outer Tube in Vertical
Annular Tubes Submerged in Saturated Liquid (Change in critical heat flux characteristic due to heated
equivalent diameter) 1999
平面噴流沸騰系の限界熱流束(サブクールの影響について) 1998
Characteristics of Heat Transfer Coefficient during Nucleate Pool Boiling of Binary Mixtures 1998
Effect of subcooling on critical heat flux during pool boiling on a horizontal heated wire 1998
Characteristic of Critical Heat Flux in Two Phase Thermosyphon (relationship between maximum falling
liquid rate and instability on interface of falling liquid film) 1998
An Experimental Investigation of CHF in an Open Concentric-tube Thermosyphon 1998
Experimental Study of CHF in Concentric-tube Open Thermosyphon 1998
Experimental Study on Heat Tr
ansfer Augmentation for High Heat Flux Removal in Rib-roughened
Narrow Channels 1998
Design Window for Shield Thermal Energy Storage for Pulsed TOKAMAK Fusion Reactors 1998
An Experimental Study of Ingress-of Coolant Accident in Fusion Reactors 1998
垂直二重円管二相熱サイフォンの限界熱流束(限界熱流束の改善について) 1998
Characteristics of Heat Transfer Coefficient during Nucleate Pool Boiling of Binary Mixtures 1998
Critical Heat Flux in Pool Boiling on a Vertical Heater 1997
垂直加熱面上のプール沸騰における限界熱流束 1997
Critical Heat Flux in Forced Convective Subcooled Boiling with a Plane Jet
(Effect of subcooling on CHF) 1997
2成分混合媒体のプール沸騰における沸騰熱伝達の特性 1997
鉛直二相熱サイフォンの限界熱流束(最大流下量と不安定理論の関係) 1997
Shape of an Annular Liquid Jet 1997
シビアアクシデントに関する熱流動研究の最近の動向 1997
Experimental study of critical heat flux in open concentric-tube thermosyphon 1997
Critical heat flux in open two-phase thermosyphon
(Relationship between maximum falling liquid rate and instability of interface of falling liquid) 1997
Critical Heat Flux in Forced convective Subcooled Boiling with Multiple Impinging Jets 1996
Analytical Study of Critical Heat Flux in Two-Phase Thermosyphon: Relationship between maximum
falling liquid rate and critical heat flux 1996
Experimental study of critical heat flux in open two-phase thermosyphon 1996
Analytical Study of Critical Heat Flux in Two-Phase Thermosyphon
(Relationship between maximum falling liquid rate and critical heat flux) 1996
Enhancement of Heat Transfer due to Bubbles Passing through a Narrow Vertical Rectangular Channel
(Change in Heat Transfer along Flow) 1995
二相熱サイフォンの限界熱流束の解析的研究(最大流下液量と限界熱流束の関連について) 1995
開放形二相熱サイフォンの限界熱流束の実験的研究 1995
Critical Heat Flux in Forced convective Subcooled Boiling with One and More Impinging Jets 1995
狭い垂直長方形流路内を通過する気泡による熱伝達の促進 1994/09
複数衝突噴流沸騰系のサブクール限界熱流束 1994/05
衝突噴流沸騰系の限界熱流束(サブク-ルの影響) 1994/03
垂直二重円管内の自然対流沸騰系の限界熱流束 1994/03
Nucleate Pool Boiling Heat Transfer in Binary Mixtures 1994
Critical Heat Flux during Natural Convective Boiling on Uniformly Heated Inner Tubes in Vertical
Annular Tubes Submerged in Saturated Liquid, 1994
Critical Heat Flux in a Forced Convective Subcooled Boiling with an Impinging Jet 1994
二相熱サイフォンの限界熱流束の解析的研究 1993/04
Measurement of Liquid-Film Thickness during Pass of Bubble in a Vertical Rectangular Channel 1993
Analtical Study of Critical Heat Flux of a Two-Phase Thermosyphon 1993
二成分混合媒体のプール沸騰熱伝達 1991/12
狭い長方形流路内を上昇しているスラグ気泡下に形成される液膜厚さについて 1991/10
Critical Heat Flux in Saturated Forced Convective Boiling with Multiple Impinging Jets 1991
Measurement of Liquid Film Thickness during Pass of Bubble in a Vertical Rectangular Channel 1990
Critical Heat Flux during Natural Convective Boiling in Vertical Uniformly Heated Tubes submerged in
Saturated Liquid 1990
Enhancement of Heat Transfer due to Bubbles Passing through a Narrow Vertical Rectangular Channel
(Theoretical Analysis with Evaporation on an Interface) 1989
Enhancement of Heat Transfer due to Bubbles Passing through a Narrow Vertical Rectangular Channel
(Heat Transfer Enhancement in Subcooled Liquid), 1989
Experimental Study of Heat Transfer for a Rotating Cylinder Water Jet Impingement Quenching; 2013 ANNOUNCEMENT INFO.; Journal of Energy and Power Engineering, 7, 3, 411-422 AUTHOR; Mozumder Aloke Kumar,Mitsutake Yuichi, Monde Masanori
Understanding of Thermal Characteristics of Fueling Hydrogen High Pressure Tanks and Governing Parametes; 2013 ANNOUNCEMENT INFO.; SAE Technical Paper AUTHOR; Monde, M. and Kosaka, M
Characteristics of CFRP hydrogen storage vessel on rising temperature in the filling process; 2013 ANNOUNCEMENT INFO.; Procedia Engineering,, 56, 719-724 AUTHOR; Md. Tawhidul Islam Khan and Masanori Monde
Estimation of temperature change in practical hydrogen pressure tanks being filled at high pressures of 35 and 70 MPa; 2012/01 ANNOUNCEMENT INFO.; International Journal of Hydrogen Energy, 37, 5723-5734 AUTHOR; Masanori Monde, Peter Woodfield, Toshio Takano, Masataka Kosaka
Enhancement of nucleate pool boiling heat transfer in ammonia/water mixtures with a surface-active agent; 2012 ANNOUNCEMENT INFO.; International Journal of Heat and Mass Transfer, 55, 3395-3399 AUTHOR; Toshiaki Inoue, Masanori Monde
Lower Limit of Homogeneous Nucleation Boiling Explosion in Water; 2011 ANNOUNCEMENT INFO.; International Journal of Heat and Mass Transfer, 54, 3226-3233 AUTHOR; Mohammad Nasim Hasan, Masanori Monde and Yuichi Mitsutake
Homogeneous Nucleation Boiling during Jet Impingement Quench of Hot Surfaces above Thermodynamic Limiting Temperature; 2011 ANNOUNCEMENT INFO.; International Journal of Heat and Mass Transfer., 54, 2837-2843 AUTHOR; Mohammad Nasim Hasan, Masanori Monde, and Yuichi Mitsutake
Model for Boiling Explosion during Rapid Liquid Heating; 2011 ANNOUNCEMENT INFO.; International Journal of Heat and Mass Transfer, 54, 2844-2853 AUTHOR; Mohammad Nasim Hasan, Masanori Monde, and Yuichi Mitsutake
Homogeneous Boiling Explosion during High Heat Flux Pulse Heating of Water; 2011 ANNOUNCEMENT INFO.; Thermal Science and Engineering, 19, 4, 95-102 AUTHOR; Hasan, M., Monde, M. and Mitsutake, Y.
Simple measurement of thermal diffusivity and thermal conductivity using inverse solution for one-dimensional heat conduction; 2010 ANNOUNCEMENT INFO.; International Journal of Heat and Mass Transfer, 53, 5343-5349 AUTHOR; Masanori Monde, Masataka Kosaka, Yuichi Mitsutake
Prediction of Filling Time and Temperature of Precooled Hydrogen During Filling of Hydrogen into a High –Pressure Tank; 2010 ANNOUNCEMENT INFO.; SAE International AUTHOR; Masanori Monde, Seiichi Tanaka, and Toshio Takano
Prediction of Pool Boiling Heat Transfer Coefficient in Ammonia/Water Mixtures; 2009 ANNOUNCEMENT INFO.; Heat Transfer-Asian Research, 38, 2, 65-72 AUTHOR; Toshiaki I. and Masanori M.
Prediction of Turbulent Flow Structure in a Fully Developed Rib-Roughened Narrow Rectangular Channel; 2009 ANNOUNCEMENT INFO.; Journal of Thermal Science, 18, 2, 126-136 AUTHOR; Islam, Md.S., Kaminaga, M., Hino, R., Monde, M.
Operating limit of heat transport in two-phase thermosyphon with connecting pipe (heated surface temperature fluctuation and flow pattern); 2009 ANNOUNCEMENT INFO.; International Journal of Heat and Mass Transfer, 52, 4519-4524 AUTHOR; Toshiaki Inoue, Masanori Monde
Hydrogen Gas Filling into an Actual Tank at High Pressure and Optimization of Its Thermal Characteristics; 2009 ANNOUNCEMENT INFO.; Journal of Thermal Science, 18, 3, 235-240 AUTHOR; Md. Tawhedul Islam Khan, Masanori Monde and Toshiaki Setoguchi
Enhancement of Heat Transfer in Hydrogen Storage Tank with Hydrogen Absorbing Alloy (Optimum Fin Layout); 2008 ANNOUNCEMENT INFO.; Heat Transfer-Asian Research, 37, 3, 165-183 AUTHOR; Mitsutake, Y., Monde, M., Shigetaka, K., Tsunokake, S. and Fuura, T.
Heat Transfer Characteristics during Quench of High Temperature Solid; 2008 ANNOUNCEMENT INFO.; Journal of Thermal Science and Technology, 52, 460-465 AUTHOR; Monde, M
On the Size of Boiling Region in Jet Impingement Quenching; 2008 ANNOUNCEMENT INFO.; International Journal of Heat and Mass Transfer, 52, 460-465 AUTHOR; Woodfield,P.L., Mozumder,A.K., and Monde,M.
Heat Transfer Characteristics for Practical Hydrogen Pressure Vessels Being Filled at High Pressure; 2007 ANNOUNCEMENT INFO.; Journal of Thermal Science and Technology, 3, 2, 241-253 AUTHOR; Woodfield, P. L., Monde, M., and Takano, T.
Effect of Pressure on Mass Absorption in an Ammonia-Water Absorption System; 2007 ANNOUNCEMENT INFO.; Heat Mass Transfer(Published online), 44, 43-50 AUTHOR; Mustafa, H. and Monde, M.
Jet Impingement Boiling in Hot Surfaces Well above The Limiting Temperature for Solid-Liquid Contact; 2007 ANNOUNCEMENT INFO.; Multiphase Science and Technology, 19, 2, 167-181 AUTHOR; Islam, M. A., Monde, M., Woodfield, P. L., Mitsutake, Y. and Mozumder, A. K.
Measurement of Averaged Heat Transfer Coefficients in High-Pressure Vessel during Charging with Hydrogen,Nitrogen or Argon Gas; 2007 ANNOUNCEMENT INFO.; Journal of Thermal Science and Technology, 2, 2, 180-191 AUTHOR; Woodfield, P. L.., Monde, M. and Mitsutake, Y.
Maximum Heat Flux Propagation Velocity during Quenching by Water Jet Impingement; 2007 ANNOUNCEMENT INFO.; Int. J. Heat Mass Transfer, 50, 1559-1568 AUTHOR; Mozumder, A., Woodfield, P. L., Islam, A. K.. and Monde, M.
Characteristics of Heat Transfer and Temperature Rise of Hydrogen during Rapid Hydrogen Filling at High Pressure; 2007 ANNOUNCEMENT INFO.; Heat Transfer-Asian Research, 36, 1, 13-27 AUTHOR; Monde, M., Mitsutake Y., Woodfield, P. L.. and Maruyama, S.
On Estimating Thermal Diffusivity Using Analytical Inverse Solution for Unsteady One-Dimensional Heat Conduction; 2007 ANNOUNCEMENT INFO.; Int. J. Heat Mass Transfer, 50, 1202-1205 AUTHOR; Woofield, P. L, Monde, M. and Mitsutake, Y.
Characteristics of Heat Transfer and Temperature Increase of Hydrogen during Filling at High Pressure; 2006/03 ANNOUNCEMENT INFO.; , 72, 715, 738-744 AUTHOR;
Quenching of High Temperature Cylindrical Surface with an Impinging Jet : Maximum Heat Flux; 2006/02 ANNOUNCEMENT INFO.; , 72, 714, 383-389 AUTHOR;
Characteristics of Boiling Curve in Transition Region between Nucleate Boiling and Film Boiling; 2006 ANNOUNCEMENT INFO.; Heat Transfer-Asian Research, 35(1), 20-34 AUTHOR; Monde, M. Liu, W, Mitsutake Y., and Oo, K. Z.
Implementation of an Analytical Two-Dimensional Inverse Heat Conduction Technique to Practical Problems; 2006 ANNOUNCEMENT INFO.; Int. J. Heat Mass Transfer, 49, 187-197 AUTHOR; Woodfield, P. L, Monde, M. and Mitsutake Y.
Maximum Heat Flux in Relation to Quenching of a High Temperature Surface with Liquid Jet Impingement; 2006 ANNOUNCEMENT INFO.; Int. J. Heat Mass Transfer, 49, 2877-2888 AUTHOR; Mozumder, A. K., Monde, M., Woodfield, P. L.. And Islam, A.
Improved Analytical Solution for Inverse Heat Conduction Problems on Thermally Thick and Semi-infinite Solids; 2006 ANNOUNCEMENT INFO.; Int. J. Heat Mass Transfer, 49, 2864-2876 AUTHOR; Woodfield, P. L, Monde, M. and Mitsutake Y.
Improvement of Inverse Solution in Heat Conduction using Laplace Transformation; 2005/10 ANNOUNCEMENT INFO.; , 71, 710, 2523-2530 AUTHOR;
Quenching of High Temperature Cylindrical Surface with an Impinging Jet : Resident Time and Wetting Temperature; 2005/06 ANNOUNCEMENT INFO.; , 71, 706, 1640-1646 AUTHOR;
Bubble Behavior and Heat Transfer during Pool Boiling of Binary Mixtures; 2005/02 ANNOUNCEMENT INFO.; , 71, 702, 546-551 AUTHOR;
Observations of High Temperature Impinging Jet Boiling Phenomena; 2005 ANNOUNCEMENT INFO.; Int. J. Heat Mass Transfer, 48, 2032-2041 AUTHOR; Woodfield, P. L., Monde, M., Mozumder, A. K.
Analysis of ammonia absorption into ammonia water mixtures (mass diffusion flux); 2005 ANNOUNCEMENT INFO.; Heat and mass Transfer, 41, 875-889 AUTHOR; Mahmoud I., Ishida K., and Monde M.
Experimental Study of CHF in Concentric-tube Open Thermosyphon; 2005 ANNOUNCEMENT INFO.; Int. J. Heat Mass Transfer, 41, 23, 3692-3704 AUTHOR; Islam MD A., Monde M. and Mitsutake Y.
Delay of wetting propagation during jet impingement quenching for a high temperature surface; 2005 ANNOUNCEMENT INFO.; Int. J. Heat Mass Transfer, 48, 25-26, 5395-5407 AUTHOR; Mozumder, A. K., Monde, M., Woodfield, P. L.
Bubble Behavior and Heat Transfer during Pool Boiling of Binary Mixtures; 2005 ANNOUNCEMENT INFO.; Heat Transfer-Asian Research, 34(7), 449-459 AUTHOR; Inoue, T., Monde, M. and E. Yamagawa
CHF Characteristics and Correlations of Concentric-tube Open Thermosyphon Working with R22; 2005 ANNOUNCEMENT INFO.; Int. J. Heat Mass Transfer, 48, 4615-4622 AUTHOR; Islam MD A., Monde M. and Mitsutake Y.
Measurement of Thermal Diffusivity and Conductivity for Metal-hydrogen; 2004/12 ANNOUNCEMENT INFO.; , 70, 700, 3264-3270 AUTHOR;
Characteristics of Quenching High Temperature Cylindrical Surface with an Impinging Jet : Relationship between Flow Aspect and Heat Transfer; 2004/06 ANNOUNCEMENT INFO.; , 70, 694, 1510-1517 AUTHOR;
Analysis of Ammonia Vapor into Ammonia Water Mixtures – Rate of Absorption Reaction –; 2004 ANNOUNCEMENT INFO.; Thermal Science and Engineering, 12, 1, 19-26 AUTHOR; Mohmoud I., Ishida K. and Monde M.
Characteristics of heat transfer and wetting front during quenching by jet impingement; 2004 ANNOUNCEMENT INFO.; Thermal Science and Engineering, 12, 1, 1-10 AUTHOR; Hammad, J., Monde, M. and Mitsutake, Y.
Movement of Maximum Heat Flux and Wetting Front during Quenching of Hot Cylindrical Block; 2004 ANNOUNCEMENT INFO.; Int.J.Thermal Sience, 43, 743-752 AUTHOR; Hammad, J. A., Mitsutake, Y., and Monde, M.
Enhancement of pool heat transfer in water and ethanol/water mixtures with surface-active agent; 2004 ANNOUNCEMENT INFO.; Int.j. Heat and Mass Transfer, 47, 5554-5563 AUTHOR; Inoue, T., Teruya, Y. and Monde, M.
Enhancement of pool heat transfer in water and ethanol/water mixtures (Effect of surface-active agent); 2004 ANNOUNCEMENT INFO.; Heat Transfer-Asian Research, 33(4), 229-244 AUTHOR; Inoue, T., Teruya, Y., Ishii, M. and Monde, M.
Prediction of Position of Moving Heat Source using Inverse Solution; 2003/07 ANNOUNCEMENT INFO.; , 69, 683, 1651-1658 AUTHOR;
Enhancement of Pool Boiling Heat Transfer in Water and Alcohol/Water Mixtures : Effect of Surface-active Agent; 2003/06 ANNOUNCEMENT INFO.; , 69, 682, 1453-1460 AUTHOR;
Analytical Method in Inverse Heat Transfer Problem Using Laplace Transform Technique(Application to Second and third boundary conditions); 2003 ANNOUNCEMENT INFO.; Heat Transfer-Asian Research , 32, 1, 29-41 AUTHOR; Monde M., Arima H. and Mitsutake Y
Estimation of Surface Temperature and Heat Flux using Inverse Solution for One Dimensional Heat Conduction; 2003 ANNOUNCEMENT INFO.; J. of Heat Transfer, 125, 2, 213-223 AUTHOR; Monde M., Arima H. and Mitsutake Y
Analytical Solution for Two-Dimensional Inverse Heat Conduction Problem using Laplace Transformation; 2003 ANNOUNCEMENT INFO.; Int.j.of Heat and Mass Transfer, 46, 2135-2148 AUTHOR; Monde M., Arima H., Liu W., Mitutake Y. and Hammod J.
Heat transfer in pool boiling of ammonia/water mixture; 2003 ANNOUNCEMENT INFO.; Heat and mass Transfer, 39, 535-543 AUTHOR; Arima H., Monde M. and Mitsutake Y.
Application of Inverse Solution in Two Dimensional Heat Conduction Problem using Laplace Transformation; 2003 ANNOUNCEMENT INFO.; Heat Transfer-Asian Research, 32, 7, 602-617 AUTHOR; Monde, M., Hammad, J. A., Arima, H. and Mitsutake Y.
Analytical Method of Two Dimensional Inverse Heat Conduction Problem using Laplace Transformation(Effect of number of measurement points); 2003 ANNOUNCEMENT INFO.; Heat Transfer-Asian Research, 32, 7, 618-629 AUTHOR; Monde, M., Arima, H., Liu, W., Mitsutake Y. and Hammad, J. A.
Improvement of Inverse Heat Conduction Solution using Laplace Transformation(Method of partial division of time); 2003 ANNOUNCEMENT INFO.; Heat Transfer-Asian Research, 32, 7, 630-638 AUTHOR; Monde, M., Liu, W., Arima, H., Mitsutake Y. and Hammad, J. A.
Ultra High critical heat flux during forced flow boiling heat transfer with an impinging jet; 2003 ANNOUNCEMENT INFO.; J. of Heat Transfer, 125, 1038-1045 AUTHOR; Mitsutake, Y. and Monde, M
Determination of Surface Temperature and Heat Flux using Inverse Solution for Two Dimensional Heat
Conduction; 2002 ANNOUNCEMENT INFO.; Thermal Science and Engineering, 0, 2, 17-26 AUTHOR; Hammod J., Monde M., Mitsutake Y. and Arima H.
Estimation of Surface Temperature and Heat Flux using Inverse Solution for One Dimensional Heat
Conduction; 2002 ANNOUNCEMENT INFO.; Thermal Science and Engineering, 10, 2, 27-37 AUTHOR; Arima H., Monde M. and Mitsutake Y.
Experimental Analysis of Turbulent Flow Structure in a Fully Developed Rib-Roughened Rectangular Channel
with PIV; 2002 ANNOUNCEMENT INFO.; Experiments in Fluids, 33, 2, 296-306 AUTHOR; Islam M. S., Haga, K., Kaminaga M., Hino R. and Monde M.
Critical heat flux of natural circulation boiling in a vertical tube, (Effect of oscillation and circulation on
CHF) ; 2002 ANNOUNCEMENT INFO.; Int. J. of Heat and Mass Transfer, 45, 20, 4133-4139 AUTHOR; Monde M. and Mitsutake Y.
Mass and Heat Transfer during Absorption of Ammonia into Ammonia Water Mixture.; 2002 ANNOUNCEMENT INFO.; Int. Com. of Heat and Mass Transfer, 29, 6, 773-786 AUTHOR; Mohmoud I., Ishida K. and Monde M.
Pool Boiling Heat Transfer in Binary Mixtures of Ammonia/Water; 2002 ANNOUNCEMENT INFO.; Int. J. of Heat and Mass Transfer, 45, 22, 4409-4415 AUTHOR; Inoue T., Monde M., and Teruya Y.
Pool Boiling Heat Transfer in Binary Mixtures of Ammonia/Water:
Effect of Heat of Dilution and Dissolution on Heat Transfer Coefficient; 2002 ANNOUNCEMENT INFO.; Heat Transfer- Asian Research, 31, 4, 272-283 AUTHOR; Inoue T., Monde M., Teruya, Y. and Ikeda, H.
A New Estimation Method of Thermal Diffusivity Using Analytical Inverse Solution for One
Dimensional Heat Conduction; 2001 ANNOUNCEMENT INFO.; Int. J. Heat Mass Transfer, 44, 16, 3169-3177 AUTHOR; Monde M. and Mitsutake Y.
Heat Transfer during Transient Cooling of High Temperature Surface with an Impinging Jet; 2001 ANNOUNCEMENT INFO.; Heat and Mass Transfer, 321-328 AUTHOR; Mitsutake Y. and Monde M.
Critical Heat Flux in Forced Convective Subcooled Boiling with a Plane Jet (Revised correlation); 2000 ANNOUNCEMENT INFO.; Heat and Mass Transfer, 36, 2, 97-101 AUTHOR; Monde M. and Wang X.
Critical Heat Flux during Natural Circulation Boiling of Saturated Liquid in Annulus with Heated
Outer Tube; 2000 ANNOUNCEMENT INFO.; J. of Heat Transfer, 122, 1, 74-79 AUTHOR; Monde M. and Mitsutake Y.
Analytical Method in Inverse Heat Transfer Problem Using Laplace Transform Technique; 2000 ANNOUNCEMENT INFO.; Int. J. Heat Mass Transfer, 43, 21, 3965-3975 AUTHOR; Monde M.
Enhancement of CHF in Open Thermosyphon with Heated Bottom Chamber; 2000 ANNOUNCEMENT INFO.; Int. J. Heat Mass Transfer, 43, 18, 3341-3346 AUTHOR; Monde M. and Mitsutake Y.
Heat Transfer during Transient Cooling of High Temperature Surface with an Impinging Jet; 2000 ANNOUNCEMENT INFO.; Multiphase Science and Technology, 12, 3& 4, 177-194 AUTHOR; Mitsutake Y. and Monde M.
Critical Heat Flux in Forced Convective Subcooled Boiling with a Plane Jet (Effect of subcooling on CHF)
Convective Flow and Pool Boiling (edited by F. Mayinger et al.); 1999 ANNOUNCEMENT INFO.; Taylor & Francis Publisher, 329-336 AUTHOR; Monde M., Wang X. and Mitsutake Y.
Critical Heat Flux during Natural Circulation Boiling on Uniformly Heated Outer Tube in Vertical
Annular Tubes Submerged in Saturated Liquid (Change in critical heat flux characteristic due to heated
equivalent diameter); 1999 ANNOUNCEMENT INFO.; Int. J. Heat Mass Transfer, 42, 16, 3189-3194 AUTHOR; Monde M., Mitsutake Y. and Hayashi M.
Characteristics of Heat Transfer Coefficient during Nucleate Pool Boiling of Binary Mixtures; 1998 ANNOUNCEMENT INFO.; Heat and Mass Transfer, 33, 337-344 AUTHOR; Inoue T., Kawae N. and Monde M.,
Effect of subcooling on critical heat flux during pool boiling on a horizontal heated wire; 1998 ANNOUNCEMENT INFO.; Heat and Mass Transfer, 33, 481-488 AUTHOR; Inoue T., Kawae N. and Monde M.
Characteristic of Critical Heat Flux in Two Phase Thermosyphon (relationship between maximum falling
liquid rate and instability on interface of falling liquid film); 1998 ANNOUNCEMENT INFO.; Heat and Mass Transfer, 34, 135-142 AUTHOR; Mihara S. and Monde M.
An Experimental Investigation of CHF in an Open Concentric-tube Thermosyphon; 1998 ANNOUNCEMENT INFO.; Heat Transfer, 2, 181-186 AUTHOR; Islam MD A., Monde M., Hasan MD Z. and Mitsutake Y.
Experimental Study of CHF in Concentric-tube Open Thermosyphon; 1998 ANNOUNCEMENT INFO.; Int. J. Heat Mass Transfer, 41, 23, 3692-3704 AUTHOR; Islam MD A., Monde M., Hasan MD Z. and Mitsutake Y.
Experimental Study on Heat Tr
ansfer Augmentation for High Heat Flux Removal in Rib-roughened
Narrow Channels; 1998 ANNOUNCEMENT INFO.; J. of Nuclear Science and Technology, 35, 9, 671-678 AUTHOR; Islam Md S., Hino R., Haga K., Monde M. and Sudo Y.
Design Window for Shield Thermal Energy Storage for Pulsed TOKAMAK Fusion Reactors; 1998 ANNOUNCEMENT INFO.; Fusion Engineering and Design, 41, 547-554 AUTHOR; Hasan MD. Z., Monde M., Mitsutake Y. and Islam MD. A.
An Experimental Study of Ingress-of Coolant Accident in Fusion Reactors; 1998 ANNOUNCEMENT INFO.; Fusion Engineering and Design, 42, 73-81 AUTHOR; Hasan MD. Z., Monde M., Mitsutake Y. and Iwamoto K.
Characteristics of Heat Transfer Coefficient during Nucleate Pool Boiling of Binary Mixtures; 1998 ANNOUNCEMENT INFO.; Heat Transfer-Japanese Research, 27, 535-549 AUTHOR; Inoue T., Kawae N. and Monde M
Critical Heat Flux in Pool Boiling on a Vertical Heater; 1997 ANNOUNCEMENT INFO.; Heat and Mass Transfer, 32, 6, 435-440 AUTHOR; Monde M., Inoue T. and Mitsutake Y.
Critical Heat Flux in Forced Convective Subcooled Boiling with a Plane Jet
(Effect of subcooling on CHF); 1997 ANNOUNCEMENT INFO.; Heat and Mass Transfer, 33, 1/2, 167-175 AUTHOR; Wang X. and Monde M.
Experimental study of critical heat flux in open concentric-tube thermosyphon; 1997 ANNOUNCEMENT INFO.; Heat Transfer-Japanese Research, 26, 5, 319-331 AUTHOR; Mitsutake Y., Monde M., Hasan MD. Z. and Kim W.
Critical heat flux in open two-phase thermosyphon
(Relationship between maximum falling liquid rate and instability of interface of falling liquid); 1997 ANNOUNCEMENT INFO.; Heat Transfer-Japanese Research, 26, 6, 372-384 AUTHOR; Monde M., Mitsutake Y. and Hataya T.
Critical Heat Flux in Forced convective Subcooled Boiling with Multiple Impinging Jets; 1996 ANNOUNCEMENT INFO.; J. of Heat Transfer, 118, 241-243 AUTHOR; Monde M. and Mitsutake Y.
Analytical Study of Critical Heat Flux in Two-Phase Thermosyphon: Relationship between maximum
falling liquid rate and critical heat flux; 1996 ANNOUNCEMENT INFO.; J. of Heat Transfer, 118, 422-428 AUTHOR; Monde M.
Experimental study of critical heat flux in open two-phase thermosyphon; 1996 ANNOUNCEMENT INFO.; Heat and Mass Transfer, 31, 393-398 AUTHOR; Monde M., Mihara S. and Mitsutake Y.
Analytical Study of Critical Heat Flux in Two-Phase Thermosyphon
(Relationship between maximum falling liquid rate and critical heat flux); 1996 ANNOUNCEMENT INFO.; JSME Int. Journal, 39, 4, 768-779 AUTHOR; Monde M., Mitsutake Y., ^M Kurihara A. and Mihara S.
Enhancement of Heat Transfer due to Bubbles Passing through a Narrow Vertical Rectangular Channel
(Change in Heat Transfer along Flow); 1995 ANNOUNCEMENT INFO.; Heat and Mass Transfer, 31, 77-81 AUTHOR; Monde M. and Mitsutake Y.
Critical Heat Flux in Forced convective Subcooled Boiling with One and More Impinging Jets; 1995 ANNOUNCEMENT INFO.; Convective Flow Boiling edited by J. C. Chen et al., Taylor & Francis Publisher, 225-230 AUTHOR; Monde M. and Mitsutake Y.
Nucleate Pool Boiling Heat Transfer in Binary Mixtures; 1994 ANNOUNCEMENT INFO.; W�rme-und Stoff�bertragung, 29, 2, 171-180 AUTHOR; Inoue T. and Monde M.
Critical Heat Flux during Natural Convective Boiling on Uniformly Heated Inner Tubes in Vertical
Annular Tubes Submerged in Saturated Liquid,; 1994 ANNOUNCEMENT INFO.; W�rme-und Stoff�bertragung, 29, 3, 271-276 AUTHOR; Monde M., Mitsutake Y. and Kubo S.
Critical Heat Flux in a Forced Convective Subcooled Boiling with an Impinging Jet; 1994 ANNOUNCEMENT INFO.; Heat Transfer, 94, 7, 515-520 AUTHOR; Monde M., Kitajima K., Inoue T. and Mitsutake Y.
Measurement of Liquid-Film Thickness during Pass of Bubble in a Vertical Rectangular Channel; 1993 ANNOUNCEMENT INFO.; Heat Transfer-Japanese Research, 21, 4, 412-423 AUTHOR; Monde M., Mihara S. and Okafuji H.
Analtical Study of Critical Heat Flux of a Two-Phase Thermosyphon; 1993 ANNOUNCEMENT INFO.; Heat Transfer-Japanese Research, 22, 6, 611-624 AUTHOR; Monde M., Mihara S. and Inoue T.
Critical Heat Flux in Saturated Forced Convective Boiling with Multiple Impinging Jets; 1991 ANNOUNCEMENT INFO.; Trans. of ASME, J. of Heat Transfer, 113, 3, 722-727 AUTHOR; Monde M. and Inoue T.
Measurement of Liquid Film Thickness during Pass of Bubble in a Vertical Rectangular Channel; 1990 ANNOUNCEMENT INFO.; Trans. of ASME, J. of Heat Transfer, 112, 1, 255-258 AUTHOR; Monde M.
Critical Heat Flux during Natural Convective Boiling in Vertical Uniformly Heated Tubes submerged in
Saturated Liquid; 1990 ANNOUNCEMENT INFO.; Heat Transfer, 2, 111-116 AUTHOR; Monde M. and Yamaji K.
Enhancement of Heat Transfer due to Bubbles Passing through a Narrow Vertical Rectangular Channel
(Theoretical Analysis with Evaporation on an Interface); 1989 ANNOUNCEMENT INFO.; Int. J. Multiphase Flow, 15, 5, 803-814 AUTHOR; Monde M. and Mitsutake Y.
Enhancement of Heat Transfer due to Bubbles Passing through a Narrow Vertical Rectangular Channel
(Heat Transfer Enhancement in Subcooled Liquid),; 1989 ANNOUNCEMENT INFO.; W�rme-und Stoff�bertragung, 24, 6, 321-328 AUTHOR; Monde M., Mihara S., Mitsutake Y., and Shinohara K.
Upper Limit of Enhancement of Boiling Heat Transfer in a Narrow Vertical Rectangular Channel due
to Passing Bubble; 1988 ANNOUNCEMENT INFO.; W�rme-und Stoff�bertragung, 22, 1/2, 91-95 AUTHOR; Monde M., Mihara S. and Ono Y.
Critical Heat Flux in Saturated Forced Convective Boiling with an Impinging Jet
(Coexistence of pool and forced convective boilings ); 1988 ANNOUNCEMENT INFO.; Heat Transfer-Japanese Research, 17, 5, 81-91 AUTHOR; Monde M. and Furukawa Y.
Characteristic of Heat Transfer Enhancement due to Bubble Passing Through a Narrow Vertical Channel; 1988 ANNOUNCEMENT INFO.; Trans. of ASME, J. Heat Transfer, 110, 4A, 1017-1019 AUTHOR; Monde M.
Critical Heat Flux in a Saturated Forced Convection Boiling on Heated Disk with an Impinging Jet; 1987 ANNOUNCEMENT INFO.; Heat Transfer-Japanese Research, 16, 5, 70-82 AUTHOR; Monde M., Nagae O., and Ishibashi Y.
Boiling Heat Transfer on a Fine Horizontal Wire in Refrigerant-oil Mixture; 1987 ANNOUNCEMENT INFO.; Heat Transfer-Japanese Research, 16, 6, 48-60 AUTHOR; Monde M. and Hahne E.
Critical Heat Flux in a Saturated Forced Convection Boiling on Heated Disk with an Impinging Jet; 1987 ANNOUNCEMENT INFO.; Trans. of ASME, J. Heat Transfer, 109, 4, 991-996 AUTHOR; Monde M.
Boiling Heat Transfer in a Narrow Rectangular Channel; 1986 ANNOUNCEMENT INFO.; Heat Transfer, 4, 2105-2110 AUTHOR; Monde M., Kusuda H., Uehara H., and Nakaoka T.
Critical Heat Flux in Saturated Forced Convective Boiling on a Heated Disk with an Impinging Jet
- A new generalized correlation-; 1985 ANNOUNCEMENT INFO.; W�rme-und Stoff�bertragung,, 19, 3, 205-209 AUTHOR; Monde M.
Critical Heat Flux in Saturated Forced Convective Boiling on a Heated Disk with an Impinging Jet
- CHF in L-regime-; 1985 ANNOUNCEMENT INFO.; Int. J. Heat Mass Transfer, 28, 3, 547-552 AUTHOR; Monde M. and Ohkuma Y.
Shell-and-Plate Type Heat Exchangers for OTEC Plants Trans; 1984 ANNOUNCEMENT INFO.; ASME J. of Solar Energy Engineering, 106, 3, 286-290 AUTHOR; Uehara H., Kusuda H., Monde M., Nakaoka T., and Sumitomo H.
Critical Heat Flux of Natural Convection Boiling in Vertical Rectangular Channels
Submerged in Saturated Liquid; 1982 ANNOUNCEMENT INFO.; Trans. of ASME, J. Heat Transfer,, 104, 2, 300-303 AUTHOR; Monde M., Kusuda H., and Uehara H.
Burnout Heat Flux in Saturated Forced Convective Boiling with an Impinging Jet; 1980 ANNOUNCEMENT INFO.; Heat Transfer-Japanese Research, 9, 1, 31-41 AUTHOR; Monde M.
Bubble Influence on Boiling Heat Transfer in Narrow Space ( In a low heat flux region ); 1980 ANNOUNCEMENT INFO.; Heat Transfer-Japanese Research,, 9, 3, 31-49 AUTHOR; Kusuda H., Monde M., Uehara H., and Otsubo K.
Burnout Heat Flux in Saturated Forced Convective Boiling with Two or More Impinging Jets; 1980 ANNOUNCEMENT INFO.; Heat Transfer-Japanese Research, 9, 3, 18-31 AUTHOR; Monde M., Kusuda H., and Uehara H.
Critical Heat Flux in the Saturated Forced Convective Boiling on a Heated Disk with Impinging Droplets; 1979 ANNOUNCEMENT INFO.; Heat Transfer-Japanese Research,, 8, 2, 54-64 AUTHOR; Monde M.
Burnout in a High Heat-Flux Boiling System with an Impinging Jet; 1978 ANNOUNCEMENT INFO.; Int. J. Heat Mass Transfer, 21, 3, 295-305 AUTHOR; Monde M. and Katto Y.
Study of Mechanism of Burnout in a High Heat-Flux Boiling System with an Impinging Jet; 1974 ANNOUNCEMENT INFO.; Heat Transfer, 4, 245-249 AUTHOR; Katto Y. and Monde M.
Material, Commentary, Editorials, Research Report, A Comprehensive Journal Articles
Measurement and Observation of Transient Boiling Phenomena During Sudden Contact of Ethanol Droplet with Hot Sirface; 2012/06 ANNOUNCEMENT INFO.; 8th ECI International conference on Boiling and Condensation Heat Transfer(ECI-8TH) AUTHOR; Mitsutake, Y., Mozumuder, A. K., Monde, M. and Saitoh, T.
Lower Limit of Homogeneous Nucleation Boiling Explosion in Water During Linear Boundary Heating and Contact with High Temperature Surface; 2011/03 ANNOUNCEMENT INFO.; The 8th ASME-JSME Thermal Engineering Joint Conference, Hawaii, U.S.A AUTHOR; Mohammad Nasim Hasan, Masanori Monde, Yuichi Mitsutake
Prediction of Filling Time and Temperature of Precooled Hydrogen During Fillng of Hydrogen into a High-pressure Tank; 2010/09 ANNOUNCEMENT INFO.; Small Engine Technology Conference, Linz, Austria AUTHOR; Masanori MONDE, Seiichi TANAKA
Prediction of Filling Time and Temperature of Precooled Hydrogen During Fillng of Hydrogen into a High-pressure Tank; 2010/09 ANNOUNCEMENT INFO.; Small Engine Technology Conference, Linz, Austria AUTHOR; Masanori MONDE, Seiichi TANAKA
Homogeneous Nucleation Boilling During Jet Impingement Quench of Hot Surfaces; 2010/08 ANNOUNCEMENT INFO.; The 14th International Heat Transfer Conference, Washington, U.S.A. AUTHOR; Mohammad Nasim Hasan, Masanori Monde, Yuichi Mitsutake
Characteristics of Wetting Temperature and Maximum Heat Flux during Spray Cooling of Hot Surrface; 2010/08 ANNOUNCEMENT INFO.; The 14th International Heat Transfer Conference, Washington, U.S.A. AUTHOR; Yuichi Mitsutake, Masanori Monde
Characteristics of Wetting Temperature during Spray Cooling; 2009/09 ANNOUNCEMENT INFO.; 9th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows,
Gyeongju, Korea AUTHOR; Yuichi Mitsutake, Masanori Monde
Characteristics of Heat Transfer During Quenching High Temperature Material; 2009/05 ANNOUNCEMENT INFO.; 7th ECI International Conference on Boiling Heat Transfer, Florianopolis-SC, Brazil, AUTHOR; Masanori M. (Keynote Speaker) and Yuhichi M.
Effect of Solid Thermo-Physical Properties on Boiling Heat Transfer and Flow Phenomena in Jet Impingement Quenching; 2006 ANNOUNCEMENT INFO.; 17th International Symposium on Transport Phenomena AUTHOR; Islam MD A.
Time and Space Resolution of Analytical Solution for Two-Dimensional Inverse Heat Conduction Problem; 2006 ANNOUNCEMENT INFO.; 13th International Heat Transfer Conference AUTHOR; Woodfield, P. L.
Boiling and Wetting Phenomena of Hot Surface during Jet Impingement Quenching; 2006 ANNOUNCEMENT INFO.; 13th International Heat Transfer Conference AUTHOR; Islam MD A.
遷移沸騰域の伝熱および濡れ特性; 2006 ANNOUNCEMENT INFO.; AUTHOR;
Effect of Wetting Delay on Maximum Heat Flux Propagation Velocity during Water Jet Impingement Quenching; 2006 ANNOUNCEMENT INFO.; AUTHOR;
Boiling Phenomena at the Moment When a Free-Surface Water Jet Impacts on a High Temperature Surface; 2006 ANNOUNCEMENT INFO.; AUTHOR;
Thermal analysis on filling process in Hydrogen Tank; 2005/11 ANNOUNCEMENT INFO.; 2005ASME International Mechanical Engineering Congress & Exposition AUTHOR; Koshimizu, T., Kasao, D., Takata, Y., Monde, M.
Delay of wetting propagation during jet impingement quenching for a high temperature surface; 2005/09 ANNOUNCEMENT INFO.; The 16th International Symposium on Transport Phenomena AUTHOR; Monde, M., Mitsutake, Y., Mozumder, A. K., Woodfield, P. L.
Delay of Wetting Propagation during Jet Impingement Quenching for a High Temperature Surface; 2005/03 ANNOUNCEMENT INFO.; The Sixth KSME-JSME Thermal and Fluids Engineering Conference AUTHOR; Monde, M., Mitsutake, Y., Mozumder, A. K.. and Woodfield, P. L .
Bubble Behavior and Heat Transfer on a Horizontal Fine Wire during Pool Boiling of Binary Mixtures; 2005/03 ANNOUNCEMENT INFO.; The Sixth KSME-JSME Thermal and Fluids Engineering Conference AUTHOR; Inoue, T. and Monde, M.
Wetting Delay Characteristics for Quenching of a High Temperature Surface with Liquid Jet Impingement; 2004 ANNOUNCEMENT INFO.; 6th KSME-JSME Thermal and Fluids Engineering Conference AUTHOR; Mozumder, A. K.
Analysis of Ammonia Absorption into Aqueous Solution - Simultaneous mass and heat transfer -; 2004 ANNOUNCEMENT INFO.; AUTHOR;
Characteristics of Quenching High Temperature Surface with Impinging Jet; 2003/12 ANNOUNCEMENT INFO.; Int. Conference on Mechanical Engineering, 1 AUTHOR; Monde, M. (Keynote Speaker)
Critical Heat Flux and Boiling Heat Transfer in Jet Cooling; 2003/05 ANNOUNCEMENT INFO.; 5th Int. Conf. On Boiling Heat Transfer AUTHOR; Monde, M. (Keynote Speaker)
Characteristics of Transient Boiling Heat Transfer; 2003/03 ANNOUNCEMENT INFO.; Proc. of 6th ASME-JSME Thermal Engineering Joint Conference AUTHOR; Liw, W., Monde, M., and Mitsutake, Y.
Ultra High critical heat flux during forced flow boiling heat transfer with an impinging jet; 2003/03 ANNOUNCEMENT INFO.; Proc. of 6th ASME-JSME Thermal Engineering Joint Conference AUTHOR; Mitsutake, Y. and Monde, M., Liw, W., and Yoshida, Y.
Transient Heat Transfer during Quenching of a Vertical Hot surface with Bottom Flooding; 2003/03 ANNOUNCEMENT INFO.; Proc. of 6th ASME-JSME Thermal Engineering Joint Conference AUTHOR; Monde, M., Mitsutake, Y., Arima, H., Kawabe, R., and Yee, T.
Movement of Maximum Heat Flux and Wetting Front during Quenching of Hot Cylindrical Block; 2003 ANNOUNCEMENT INFO.; Int. Symposium on Transient Convective Heat and Mass Transfer in Single and Two-phase Flows (edited by J. Padet and F. Aric), 189-202 AUTHOR; Hammad, J. A., Mitsutake, Y., and Monde, M.
Transient Heat Transfer during Quenching of a Vertical Hot surface with Bottom Flooding; 2003 ANNOUNCEMENT INFO.; Int. Symposium on Transient Convective Heat and Mass Transfer in Single and Two-phase Flows (edited by J. Padet and F. Aric), 257-266 AUTHOR; Mitsutake, Y., Monde, M. and Kawabe, R.
Invited Lecture, Special Lecture
Characteristics of Quenching High Temperature Surface and Vapor Explosion; 2012/03 ANNOUNCEMENT INFO.; The 8th KSME-JSME Thermal and Fluids Engineering Conference, Incheon, Korea, AUTHOR; Masanori Monde(Keynote Speaker)
Homogeneous Nucleation Boiling Explosion Phenomena under Non-equilibrium Condition; 2011/12 ANNOUNCEMENT INFO.; International Conference on Mechanical Engineering 2011(ICME2011), Dhaka, Bangladesh, (December 18-20, 2011) AUTHOR; Monde, M. (Keynote Speaker), Mohammad Nasim HASA
Characteristics of Temperature Rise in Practical Hydrogen Pressure Tanks Being Filled at High Pressure of 35 and 70 MPa; 2011/12 ANNOUNCEMENT INFO.; International Conference on Mechanical Engineering and Renewable Energy 2011(ICMERE2011) AUTHOR; Monde, M. (Keynote Speaker)