Detailed Information

Education

• 1997/03, Graduated
• 1999/03, Master Course, Completed
• 2002/03, Doctor Course, Completed

Employment Experience

• 2002/04 - 2007/03 Research Associate, Faculty of Science and Engineering, Saga University
• 2007/04 - 2010/03 Assistant Professor, Electrical and Electronic Engineering, Faculty of Science and Engineering, Saga University
• 2010/04 -  *  Assistant Professor, Electrical and Electronic Engineering, Graduate School of Science and Engineering, Saga University

Field of Specialization

• Plasma electronics, Plasma science

Membership in Academic Societies

• The Japan Society of Plasma Science and Nuclear Fusion Research, Japan Society of Powder and Powder Metallurgy, The Japan Society of Applied Physics, The Institute of Electrical Engineers of Japan (IEEJ), The Physical Society of Japan

Themes for Ongoing Research

• Function enhancement of the Arita porcelain used by electromagnetic effect
• Development of the plasma disinfection technology for food ingredient and agricultural products
• The electric discharge mechanism of three-dimensional thermal nonequilibrium atmospheric plasma.
• Mechanism of spark plasma sintering (SPS) process
• ZnO thermoelectric film using plasma sputtering and plasma flow
• Study of the physical property of dusty plasma under low gas pressure

Research Themes in the Past

• ZnO thermoelectric film using plasma sputtering and plasma flow
• Study of the physical property of dusty plasma under low gas pressure

Research Topics and Results

• Inactivation efficacy of low-pressure plasma treatment against seed-borne tomato pathogen Clavibacter michiganensis and effect of seed setting position and mesh sheet usage 2023/10
• Temperature distribution of spark plasma sintering with control of sample structure 2023/08
• Plasma Synthesis of Silicon Nanoparticles: From Molecules to Clusters and Nanoparticle Growth 2022/09
• 放電プラズマ焼結における複雑構造試料の温度分布の制御 2021/11
• Al-Cu積層構造を用いた放電焼結プロセスの焼結挙動 2021/11
• Passivating antireflection coating of crystalline silicon using i/n a-Si:H/ SiN trilayer 2021/05
• Quality sustainment of tomatoes using three-dimensional atmospheric pressure plasma sterilization 2020/12
• 放電プラズマ焼結プロセスにおける焼結試料内部の温度分布の挙動 2020/11
• Investigation of PECS Current Pass and Temperature Distribution on Sintered Al-Cu Eutectic Alloy 2020/11
• Antibiotic-resistant and non-resistant bacteria display similar susceptibility to dielectric barrier discharge plasma 2020/08
• Disinfection Methods for Agricultural Products Using Atmospheric Plasma 2020/05
• 立体大気圧プラズマを用いたプラズマ殺菌の空間分布 2019/12
• Spatial distribution of plasma sterilization effect using 3-D atmospheric plasma 2019/11
• プラズマを利用した薬剤を使用しない低ダメージ殺菌消毒技術 2019/11
• 放電プラズマ焼結プロセスにおける試料・ダイ内部電流の分布と焼結挙動 2019/10
• Sintering behavior of Spark Plasma Sintering with control of current distribution 2019/10
• 試料とダイの内部電流を制御したSPSプロセスの焼結挙動 2019/06
• Key role of singlet oxygen and peroxynitrite in viral RNA damage during virucidal effect of plasma torch on feline calicivirus 2018/12
• Heterogeneity of sintering temperature in the boundary between different materials and graphite die on Spark Plasma Sintering Process 2018/08
• Ununiformity of sintering behaviour in the boundary between material and graphite die on Spark Plasma Sintering Process 2018/07
• Al-Cu共晶材料を用いたSPS中の温度分布の評価 2018/05
• Treatment of Helicobacter pylori with dielectric barrier discharge plasma causes UV induced damage to genomic DNA leading to cell death 2018/02
• 黒鉛容器を用いたSPSプロセスにおける焼結挙動の不均一性 2017/12
• Discharge structure of three dimensional atmospheric plasma used by water-dielectric multi-layer electrode 2017/11
• 放電プラズマ焼結における材料－ダイ境界面での焼結の不均一性 2017/11
• 多軸電流焼結プロセスにおける焼結ダイの温度分布制御 2017/11
• Effect of electrical property of graphite die on sintering behavior of Spark Plasma Sintering process 2017/11
• Control of temperature distribution in sintering die on Multi-Axis current Sintering process 2017/11
• 農産物・食品の汚染や品質劣化を防ぐプラズマ殺菌・消毒技術 2017/10
• 立体形状を持つ大気圧プラズマを用いた低温プラズマ殺菌の殺菌特性 2017/09
• Influence of electrical property of sintering die on the sintering behavior of Spark Plasma Sintering process 2017/07
• Influence of water temperature on stability of three dimensional atmospheric plasma using water dielectric multi layer electrode 2017/07
• 放電プラズマ焼結における導電性材料・ダイの電気的特性と焼結挙動 2017/06
• A new roller conveyer system of non-thermal gas plasma as a potential control measure of plant pathogenic bacteria in primary food production 2017/02
• 放電プラズマ焼結プロセスの焼結容器内部の 電流分布の温度依存性 2016/12
• 導電性材料の放電プラズマ焼結における電気的特性と焼結挙動 2016/12
• 立体形状に適応する大気圧非平衡プラズマの放電構造 2016/12
• 農産物・食品の汚染や品質劣化を防ぐプラズマ殺菌・消毒技術 2016/12
• Temperature Dependence of Current distribution on Spark Plasma Sintering Process 2016/11
• Behavior of current distribution in the conductive sintering materials on SPS process with high frequency current components 2016/10
• Behaviour of Current Distribution in the Conductive Sintering Materials on SPS Process with High Frequency Current Components 2016/10
• 大気圧プラズマを用いた農産物の殺菌消毒技術　－プラズマを用いた様々な応用技術－ 2016/09
• Dependence of Frequency and Electric Conductivity on Current Distribution in SPS Process 2016/06
• Dependence of Frequency and Electric Conductivity on Current Distribution in SPS Process 2016/06
• Gas Plasma Sterilization in Microbiology Section 11. Current Progress in Seed Disinfection by Gas Plasma: Disinfection of Seed-birne Fungi and Bacteria by Plasma with Alternating Current High-voltage Discharge 2016/03
• Low-Pressure Plasma Application for Inactivation of the Seed-borne Pathogen Xanthomonas campestris 2016/03
• プラズマ殺菌装置 2015/10
• Influence of High Frequency Components of Sintering Current on Spark Plasma Sintering Process 2015/06
• プラズマ殺菌装置 2015/05
• Seed Disinfection Effect of Atmospheric Pressure Plasma and Low Pressure Plasma on Rhizoctonia solani 2014/09
• N2 gas plasma inactivates influenza virus mediated by oxidative stress 2014/09
• Influence of frequency of power supply on sintering behavior of Spark Plasma Sintering process 2014/07
• Frequency Dependence of Internal Current Distribution on Spark Plasma　Sintering Process 2013/12
• 食品分野における非加熱殺菌技術 2013/11
• Dependence of water temperature on atmospheric discharge using water – dielectric multi – layer electrode 2013/03
• Property of Atmospheric Plasma Generated by Water-Dielectric Multi-Layer Electrode 2013/01
• Inactivation of seed-borne pathogenic fungi using atmospheric gas plasma 2013/01
• Influence of Pulsed Current Frequency on Sintering Behavior of SPS Process 2012/10
• Development of Spark Plasma Sintering Device Using Induction Heating Process 2012/10
• Characteristics of atmospheric plasma generated by water-dielectric multi-layer electrode 2012/09
• Inactivation of seed-borne pathogenic fungi using atmospheric gas plasma 2012/09
• Stability of atmospheric plasma generated by water-dielectric multi-layer electrode 2012/09
• Property of atmospheric plasma generated by water-dielectric multi-layer electrode 2012/03
• Discharge characteristic of atmospheric plasma generated using　water-dielectric multi-layer electrode 2011/11
• プラズマ生成装置 2011/11
• Independent control of internal current and heating process on spark plasma sintering process 2011/08
• Orientation of ceramics using ZnO nano powder sintered by Spark Plasma Sintering Process 2010/12
• リング状ホロー溝電極を用いた高密度容量結合型プラズマ生成 2010/03
• リング電極を用いた大気圧容量結合放電プラズマジェット生成とその応用 2010/03
• Development of novel hybrid microwave-heater reactor for paper-based waste treatment 2010/02
• Characteristics of Al-doped ZnO thermoelectric materials using Spark Plasma Sintering Process 2010/02
• Production of High-Density Plasma with Plasma-Ring Discharge 2010/02
• Characteristics of RF Capacitively Coupled Plasma with High-Secondary-Electron-Emission Electrode Materials for Mercury-Free Lamp 2010/02
• Development of Frequency Plasma Sputtering Device for Preparation of High-Temperature Piezoelectric-Sensor Thin Films 2010/02
• Preparation of Water-Repellent Thin Film with Low-Electron-Temperature Plasma CVD Using Mixture Gases of C2H2F2 and Ar 2010/02
• Influence of Internal Pulsed Current on the Sintering Behavior of Pulsed Current Sintering Process 2010/01
• Microstructure and Thermoelectric Properties of Al-doped ZnO Sintered Body 2010/01
• Effect of Intenal Current for the Structure Formation of Specimen in Spark Plasma Sintering Process 2009/12
• リング状ホロー放電による容量結合型プラズマの高密度化 2009/12
• マルチリング電極を用いた大気圧容量結合型放電プラズマジェットの生成 2009/12
• 酸化亜鉛系熱電材料の開発における放電プラズマ焼結プロセスの役割 2009/11
• SPSプロセスを用いたZnOナノ粒子焼結体の配向性に対する内部電流および加圧力の効果 2009/11
• 酸化亜鉛系熱電材料の開発における放電プラズマ焼結プロセスの役割 2009/11
• リング状ホロー溝電極を用いた高密度容量結合型プラズマの生成 2009/11
• リング状ホロー電極を用いた容量結合型プラズマ生成に与える溝とガス圧の影響 2009/11
• Production of high-density capacitively coupled plasma with RF multi-hollow cathode and/or high secondary electron emission for DLC film preparation 2009/10
• Generation of Al-doped Thermoelectric Materials using Spark Plasma Sintering Method 2009/09
• パルス通電場プロセッシング総説集（関西パルス通電懇話会編集委員会 編） 2009/09
• Production of Dual Frequency Sputtering Plasma for Preparation of Aluminum Nitride Thin Films 2009/09
• Development of high-density radio frequency plasma source with ring-shaped hollow electrode for dry processing 2009/09
• 無水銀光源のための容量結合プラズマ特性に及ぼす誘電体電極材料の影響 2009/09
• リング状ホロー電極を用いた容量結合型プラズマに及ぼす溝構造の影響 2009/09
• AlN薄膜合成のための二周波プラズマスパッタリング装置の構築 2009/09
• 高密着撥水性薄膜合成のための低電子温度プラズマ装置の構築 2009/09
• Influence of Internal Pulsed Current on the Sintering Behavior of Pulsed Current Sintering Process 2009/08
• Microstructure and Thermoelectric Properties of Al-doped ZnO Sintered Body 2009/08
• リング状溝電極を用いた高密度容量結合型プラズマの生成とその空間分布の均一化 2009/08
• 放電プラズマ焼結プロセスにおける焼結試料の構造形成に対する試料内部電流の効果 2009/06
• ZnO系焼結体の熱電特性と微構造 2009/06
• パルス通電焼結法による六ホウ化ランタンバルク体の焼結特性 2009/06
• リング状ホロー電極を用いた容量結合型プラズマの高密度化 2009/06
• Observation of internal pulsed current flow through the ZnO specimen in the spark plasma sintering method 2009/04
• 放電プラズマ焼結法を用いた酸化亜鉛系熱電材料の開発とプラズマ応用 2009/04
• Deposition of Al-doped ZnO thermoelectric thin film using Spark Plasma Sintering Method 2009/02
• Preparation of water-repellent thin film with C2H2F2/Ar plasma and investigation of its adhesion 2009/01
• Observation of dielectric barrier discharge at various Xe/Ne mixture gas ratios 2009/01
• Preparation of aluminum nitride thin film with dual frequency plasma sputtering 2009/01
• C2H2F2/Arプラズマを用いた撥水性薄膜合成 2008/12
• Xe/Ne混合ガスを用いた誘電体バリヤ放電特性 2008/12
• 二周波プラズマスパッタリング法を用いた窒化アルミニウム薄膜の高速合成 2008/12
• 放電プラズマ焼結プロセスを用いた焼結試料の配向性に対する試料内部電流の影響 2008/11
• ZnO-Al系焼結体の熱電特性 2008/11
• 放電プラズマ焼結プロセスにおける試料内部電流と試料内部構造 2008/11
• Time evolution of plasma parameter on shunting arc discharge plasma under the low gas pressure 2008/09
• C2H2F2を用いた低電子温度プラズマによる撥水性薄膜合成とその密着性の検討 2008/09
• 誘電体バリヤ放電開始電圧に与えるXe/Neガス混合比の影響 2008/09
• 二周波プラズマスパッタリングを用いた窒化アルミニウム薄膜の高速合成 2008/09
• C2H2F2を用いたプラズマCVD法による撥水性薄膜合成とその密着性の検討 2008/07
• 誘電体バリヤ放電に及ぼすXe/Neガス混合比の影響 2008/07
• 二周波プラズマスパッタリングによる窒化アルミニウム薄膜の高速合成～アルミニウム薄膜高速化～ 2008/07
• 放電プラズマ焼結プロセスにおける焼結挙動の試料内部電流の影響 2008/05
• PCS法により作製したZnO-TiO2-CoO-Al2O3系熱電材料の抵抗温度特性 2008
• Observation of internal pulsed current flow through the ZnO specimen in the spark plasma sintering method 2007/11
• パルス通電焼結法を用いた 酸化亜鉛系セラミックスの焼結における 試料内電流の磁気的計測 2007/11
• パルス通電焼結法による 酸化亜鉛系セラミックスの焼結における試料内部電流の効果 2007/09
• Laser Observation of Charged Dust Particles in RF Plasma under the Irradiation of Ultraviolet Light 2007/09
• Probe Measurement of Shunting Arc Discharge Plasma under the low gas pressure 2007/09
• パルス電流焼結法における 試料内部電流の磁気プローブを用いた計測 2007/06
• 低ガス圧下でのシャンティングアーク放電プラズマのプローブ特性 2007/01
• PCS法により作製したZnO-TiO2-CoO-Al2O3セラミックスの熱電特性と微細構造 2007
• In Situ Observations of Sintering Process during Pulsed Current Sintering of Al2O3, ZnO and WC ALLOY 2007
• Microstructure and Sintering Behavior of ZnO Thermoelectric Materials Prepared by the Pulse-Current-Sintering Method 2007
• Influence of ion-bombardment-energy on thin zirconium oxide films prepared by dual frequency oxygen plasma sputtering 2007
• Effect of negative pulsed high-voltage-bias on diamond-like carbon thin film preparation using capacitively coupled radio frequency plasma chemical vapor deposition 2007
• パルス電流焼結法による ZnO系セラミックスの焼結における 試料内部電流の直接計測 2006/12
• 低ガス圧下でのシャンティングアーク放電によるカーボンプラズマのプローブ特性 2006/11
• Influence of the Internal Current on the Sintering Behavior of ZnO Ceramics Sintered by PCS Method 2006/09
• 低ガス圧下におけるシャンティングアーク放電 プラズマのプローブ特性 2006/08
• 紫外線照射によって分極した微粒子による微粒子プラズマの生成 2006/05
• パルス電流焼結法を用いた 酸化亜鉛系セラミックスの焼結に対する 試料内部電流の影響 2006/05
• 低ガス圧下におけるカーボン電極を用いた シャンティングアーク放電プラズマの放電特性 2006/03
• 電子レンジを用いた科学創造性育成のための教材開発 2006/03
• 紫外線照射によって非等方的な強結合状態を持つ微粒子雲の生成 2006/03
• Behavior of Charged Dust Particles under the Irradiation of Ultraviolet Light 2006/01
• パルス電流焼結法を用いた酸化亜鉛系セラミックスの焼結に対する試料内部電流の影響 2006
• Influence of Ultraviolet Light on the Coulomb Coupling between Dust Particles 2005/06
• リングアンテナによる高周波放電プラズマ中で 捕捉された微粒子雲に対する紫外線照射の影響 2005/03
• 紫外線照射によって非等方的な強結合状態を持つ微粒子プラズマの生成 2005/01
• 紫外線照射によって非等方的な強結合状態を持つ微粒子プラズマの生成 2004/11
• Generation of Carbon Dust Particles in Radio Frequency Discharge Plasmas 2004/06
• Influence of Substrate Biasing on (Ba,Sr)TiO3 Films Prepared by Electron Cyclotron Resonance Plasma Sputtering 2004
• Spatial Profile of Charged Dust Particles in RF Plasma with a Ring-Shaped Antenna 2003/07
• Experimental Observation of Vertically Polarized Transverse Dust-Lattice Wave Propagating in a One-Dimensional Strongly Coupled Dust Chain 2001
• Dynamic behavior of dust particles in the plasma-sheath boundary 2001
• 低ガス圧プラズマにおけるクーロン結晶の生成と浮遊位置制御 2000
• Observation of Transverse Dust Lattice Wave Excited by Unstable Vertical Oscillations of Dust Particles in an Ion Sheath with Low Gas Pressure 2000

Books

• Gas Plasma Sterilization in Microbiology Section 11. Current Progress in Seed Disinfection by Gas Plasma: Disinfection of Seed-birne Fungi and Bacteria by Plasma with Alternating Current High-voltage Discharge;　2016/03
  ANNOUNCEMENT INFO.;　
  AUTHOR;　Terumi Nishioka, Tomoko Mishima, Yoichi Toyokawa, Tatsuya Misawa and Akikazu Sakudo
  
• 食品分野における非加熱殺菌技術;　2013/11
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• パルス通電場プロセッシング総説集（関西パルス通電懇話会編集委員会 編）;　2009/09
  ANNOUNCEMENT INFO.;　, 50-59
  AUTHOR;　
  

Original Articles

• Inactivation efficacy of low-pressure plasma treatment against seed-borne tomato pathogen Clavibacter michiganensis and effect of seed setting position and mesh sheet usage;　2023/10
  ANNOUNCEMENT INFO.;　Journal of Microorganism Control, 28, 3, 123-128
  AUTHOR;　TERUMI NISHIOKA, YUICHIRO TAKAI, TOMOKO MISHIMA, HIDEO TANIMOTO, KIYOTSUGU OKADA, TATSUYA MISAWA AND SHINICHI KUSAKARI
  
• Plasma Synthesis of Silicon Nanoparticles: From Molecules to Clusters and Nanoparticle Growth;　2022/09
  ANNOUNCEMENT INFO.;　IEEE Open Journal of Nanotechnology, Vol. 3, pp. 94-100 (2022). DOI: 10.1109/OJNANO.2022.3209995, 3, 94-100
  AUTHOR;　Shota Nunomura, Kunihiro Kamataki, Takehiko Nagai, Tatsuya Misawa, Shinji Kawai, Kosuke Takenaka, Giichiro Uchida, Kazunori Koga
  
• Passivating antireflection coating of crystalline silicon using i/n a-Si:H/ SiN trilayer;　2021/05
  ANNOUNCEMENT INFO.;　Journal of Physics and Chemistry of Solids, 156, 110127
  AUTHOR;　Shota Nunomura, Isao Sakata, Aiko Sato, Micka¨el Lozac’h, Tatsuya Misawa, Naho Itagaki, Masaharu Shiratani
  
• Investigation of PECS Current Pass and Temperature Distribution on Sintered Al-Cu Eutectic Alloy;　2020/11
  ANNOUNCEMENT INFO.;　J. Jpn. Soc. Powder Powder Metallurgy, 67, 11, 649-655
  AUTHOR;　Yuji Kawakami, Takumi Sakamaki, Tatsuya Misawa, Kaede Endo, Masakazu Kawahara
  
• Antibiotic-resistant and non-resistant bacteria display similar susceptibility to dielectric barrier discharge plasma;　2020/08
  ANNOUNCEMENT INFO.;　International Journal of Molecular Science, 21, 17, 6326
  AUTHOR;　Akikazu Sakudo, Tatsuya Misawa
  
• Disinfection Methods for Agricultural Products Using Atmospheric Plasma;　2020/05
  ANNOUNCEMENT INFO.;　, Vol. 9, No. 3, pp. 103-107
  AUTHOR;　Yuichiro TAKAI, Terumi NISHIOKA, Tatsuya MISAWA, Yoshihito YAGYU and Akikazu SAKUDO
  
• Key role of singlet oxygen and peroxynitrite in viral RNA damage during virucidal effect of plasma torch on feline calicivirus;　2018/12
  ANNOUNCEMENT INFO.;　Nature Scientific Reports, Vol. 8, Article number: 17947
  AUTHOR;　Risa Yamashiro, Tatsuya Misawa & Akikazu Sakudo
  
• Treatment of Helicobacter pylori with dielectric barrier discharge plasma causes UV induced damage to genomic DNA leading to cell death;　2018/02
  ANNOUNCEMENT INFO.;　Chemosphere, 200, June 2018, 366-372
  AUTHOR;　Akikazu Sakudo, Hirotoshi Miyagi, Takaya Horikawa, Risa Yamashiro, Tatsuya Misawa
  
• A new roller conveyer system of non-thermal gas plasma as a potential control measure of plant pathogenic bacteria in primary food production;　2017/02
  ANNOUNCEMENT INFO.;　Food Control, 72, Part A, pp.62-72
  AUTHOR;　Yoichi Toyokawa, Yoshihito Yagyu, Tatsuya Misawa and Akikazu Sakudo
  
• Behaviour of Current Distribution in the Conductive Sintering Materials on SPS Process with High Frequency Current Components;　2016/10
  ANNOUNCEMENT INFO.;　World PM2016 Congress, Session 44: Spark Plasma Sintering I, WP1603297369
  AUTHOR;　Tatsuya Misawa, Hiroaki Kodera, Yuji Kawakami, Masakazu Kawahara.
  
• Low-Pressure Plasma Application for Inactivation of the Seed-borne Pathogen Xanthomonas campestris;　2016/03
  ANNOUNCEMENT INFO.;　Biocontrol Science, 21, 1, pp.37-43
  AUTHOR;　Terumi Nishioka, Yuichiro Takai, Tomoko Mishima, Mitsuo Kawaradani, Hideo Tanimoto, Kiyotsugu Okada, Tatsuya Misawa, Shinichi Kusakari
  
• Seed Disinfection Effect of Atmospheric Pressure Plasma and Low Pressure Plasma on Rhizoctonia solani;　2014/09
  ANNOUNCEMENT INFO.;　Biocontrol Science, 19, 2, pp.99-102
  AUTHOR;　Nishioka T, Takai Y, Kawaradani M, Okada K, Tanimoto H, Misawa T, Kusakari S
  
• N2 gas plasma inactivates influenza virus mediated by oxidative stress;　2014/09
  ANNOUNCEMENT INFO.;　Frontiers in Bioscience, E6, pp.69-79
  AUTHOR;　Akikazu Sakudo, Tatsuya Misawa, Naohiro Shimizu, Yuichiro Imanishi,
  
• Property of Atmospheric Plasma Generated by Water-Dielectric Multi-Layer Electrode;　2013/01
  ANNOUNCEMENT INFO.;　Frontier of Applied Plasma Technology (ISSN 1883-5589, CODEN:FAPTBK), 6, 1, 1-5
  AUTHOR;　Tatsuya Misawa, Takayuki Ayabe, Keiichi Yamamoto, Yuusuke Akiyoshi and Nobuya Hayashi
  
• Inactivation of seed-borne pathogenic fungi using atmospheric gas plasma;　2013/01
  ANNOUNCEMENT INFO.;　AFSA Journal(Proceedings of First AFSSA Conference), 1, 26-28
  AUTHOR;　Terumi Nishioka, Yuichiro Takai, Shinichi Kusakari, Mitsuo Kawaradani, Kiyotsugu Okada, Hideo Tanimoto, Tatsuya Misawa
  
• Development of novel hybrid microwave-heater reactor for paper-based waste treatment;　2010/02
  ANNOUNCEMENT INFO.;　Journal of Material Cycles and Waste Management, 12, 1
  AUTHOR;　Y.Ohtsu, R.Yamada, H.Urasaki, T.Misawa, S.Popescu and H.Fujita
  
• Influence of Internal Pulsed Current on the Sintering Behavior of Pulsed Current Sintering Process;　2010/01
  ANNOUNCEMENT INFO.;　Materials Science Forum, 638-642, 2109-2114
  AUTHOR;　T. Misawa, N. Shikatani, Y. Kawakami, T. Enjoji and Y. Ohtsu
  
• Microstructure and Thermoelectric Properties of Al-doped ZnO Sintered Body;　2010/01
  ANNOUNCEMENT INFO.;　Materials Science Forum, 638-642, 2172-2177
  AUTHOR;　N. Shikatani, T. Misawa, Y. Kawakami, M. Ohta
  
• Effect of Intenal Current for the Structure Formation of Specimen in Spark Plasma Sintering Process;　2009/12
  ANNOUNCEMENT INFO.;　Journal of the Japan Society of Powder and Powder Metallurgy, 56, 12, 744-751
  AUTHOR;　Tatsuya Misawa, Noboru Shikatani, Yuji Kawakami, Takashi Enjoji, Masakazu Kawahara, Yasunori Ohtsu
  
• Production of high-density capacitively coupled plasma with RF multi-hollow cathode and/or high secondary electron emission for DLC film preparation;　2009/10
  ANNOUNCEMENT INFO.;　Plasma Process and Polymer, 6, S458-S461
  AUTHOR;　Y. Ohtsu, C.Nakamura, T.Misawa, H.Fujita, M.Akiyama and K.Yukimura
  
• Observation of internal pulsed current flow through the ZnO specimen in the spark plasma sintering method;　2009/04
  ANNOUNCEMENT INFO.;　Journal of Materials Science, 44, 1641-1651
  AUTHOR;　Tatsuya Misawa, Noboru Shikatani, Yuji Kawakami, Takashi Enjoji, Yasunori Ohtsu, Hiroharu Fujita
  
• PCS法により作製したZnO-TiO2-CoO-Al2O3系熱電材料の抵抗温度特性;　2008
  ANNOUNCEMENT INFO.;　, 55, 1, 10-16
  AUTHOR;　
  
• PCS法により作製したZnO-TiO2-CoO-Al2O3セラミックスの熱電特性と微細構造;　2007
  ANNOUNCEMENT INFO.;　, 54, 1, 3-9
  AUTHOR;　
  
• In Situ Observations of Sintering Process during Pulsed Current Sintering of Al2O3, ZnO and WC ALLOY;　2007
  ANNOUNCEMENT INFO.;　Materials Science Forum, 534-536, 541-544
  AUTHOR;　Y. Kawakami, F. Tamai, T. Enjoji, Noboru Shikatani, T. Misawa, et.al.
  
• Microstructure and Sintering Behavior of ZnO Thermoelectric Materials Prepared by the Pulse-Current-Sintering Method;　2007
  ANNOUNCEMENT INFO.;　Materials Science Forum, 534-536, 1541-1544
  AUTHOR;　Noboru Shikatani, Tatsuya Misawa, et.al.
  
• Influence of ion-bombardment-energy on thin zirconium oxide films prepared by dual frequency oxygen plasma sputtering;　2007
  ANNOUNCEMENT INFO.;　Surf. Coat. Technol., 201, 6627-6630
  AUTHOR;　Y. Ohtsu, Y. Hino, T. Misawa, H. Fujita, K. Yukimura and M. Akiyama
  
• Effect of negative pulsed high-voltage-bias on diamond-like carbon thin film preparation using capacitively coupled radio frequency plasma chemical vapor deposition;　2007
  ANNOUNCEMENT INFO.;　Surf. Coat. Technol., 201, 6674-6677
  AUTHOR;　Y. Ohtsu, H. Noda, C. Nakamura, T. Misawa, H. Fujita, K. Yukimura, M. Akiyama and C. Diplasu
  
• パルス電流焼結法を用いた酸化亜鉛系セラミックスの焼結に対する試料内部電流の影響;　2006
  ANNOUNCEMENT INFO.;　, 53, 10, 830-835
  AUTHOR;　
  
• Influence of Substrate Biasing on (Ba,Sr)TiO3 Films Prepared by Electron Cyclotron Resonance Plasma Sputtering;　2004
  ANNOUNCEMENT INFO.;　Jpn. J. Appl. Phys., 43, 1144-1148
  AUTHOR;　T. Matsumoto, A. Niino, Y. Ohtsu, T. Misawa, et.al.
  
• Experimental Observation of Vertically Polarized Transverse Dust-Lattice Wave Propagating in a One-Dimensional Strongly Coupled Dust Chain;　2001
  ANNOUNCEMENT INFO.;　Phys. Rev. Lett., 86, 1219-1222
  AUTHOR;　T. Misawa, N. Ohno, K. Asano, M Sawai, S. Takamura and P. K. Kaw
  
• Dynamic behavior of dust particles in the plasma-sheath boundary;　2001
  ANNOUNCEMENT INFO.;　, 8, 1886-1892
  AUTHOR;　S. Takamura, T. Misawa, N. Ohno, S. Nunomura, M. Sawai, K. Asano and P. K. Kaw
  
• 低ガス圧プラズマにおけるクーロン結晶の生成と浮遊位置制御;　2000
  ANNOUNCEMENT INFO.;　, 120, 180-185
  AUTHOR;　
  
• Observation of Transverse Dust Lattice Wave Excited by Unstable Vertical Oscillations of Dust Particles in an Ion Sheath with Low Gas Pressure;　2000
  ANNOUNCEMENT INFO.;　Jpn. J. Appl Phys., 39, L551-L553
  AUTHOR;　Tatsuya Misawa, Shota Nunomura, Noriyasu Ohno, Shuichi Takamura
  

General Lectures

• Temperature distribution of spark plasma sintering with control of sample structure;　2023/08
  ANNOUNCEMENT INFO.;　The International Conference on Sintering 2023 (August 27-31, 2023, Nagaragawa Convention Center, Gifu, Japan.), 1P-47
  AUTHOR;　T. Misawa, Y. Kawakami, M. Kawahara
  
• 放電プラズマ焼結における複雑構造試料の温度分布の制御;　2021/11
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• Al-Cu積層構造を用いた放電焼結プロセスの焼結挙動;　2021/11
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• Quality sustainment of tomatoes using three-dimensional atmospheric pressure plasma sterilization;　2020/12
  ANNOUNCEMENT INFO.;　
  AUTHOR;　Kakeru SATO, Izah Aqilah binti Zolkarnain, Tatsuya MISAWA
  
• 放電プラズマ焼結プロセスにおける焼結試料内部の温度分布の挙動;　2020/11
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• 立体大気圧プラズマを用いたプラズマ殺菌の空間分布;　2019/12
  ANNOUNCEMENT INFO.;　, P-15
  AUTHOR;　
  
• Spatial distribution of plasma sterilization effect using 3-D atmospheric plasma;　2019/11
  ANNOUNCEMENT INFO.;　29th The Materials Research Society of Japan(Yokohama Media & Communications Center, Yokohama, JAPAN, November 28, 2019), C-P28-003
  AUTHOR;　Yudai Uchida, Kakeru Sato and Tatsuya Misawa
  
• プラズマを利用した薬剤を使用しない低ダメージ殺菌消毒技術;　2019/11
  ANNOUNCEMENT INFO.;　, 食－３
  AUTHOR;　
  
• 試料とダイの内部電流を制御したSPSプロセスの焼結挙動;　2019/06
  ANNOUNCEMENT INFO.;　, 1-49A
  AUTHOR;　
  
• Al-Cu共晶材料を用いたSPS中の温度分布の評価;　2018/05
  ANNOUNCEMENT INFO.;　, 2-36A
  AUTHOR;　
  
• 黒鉛容器を用いたSPSプロセスにおける焼結挙動の不均一性;　2017/12
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• Discharge structure of three dimensional atmospheric plasma used by water-dielectric multi-layer electrode;　2017/11
  ANNOUNCEMENT INFO.;　Plasma Conference 2017, The Himeji Chamber of Commerce and Industry, Himeji, Hyogo, JAPAN, November 20-24, 2017, 22Ea-04
  AUTHOR;　Tatsuya Misawa
  
• 放電プラズマ焼結における材料－ダイ境界面での焼結の不均一性;　2017/11
  ANNOUNCEMENT INFO.;　, 2-8A
  AUTHOR;　
  
• 多軸電流焼結プロセスにおける焼結ダイの温度分布制御;　2017/11
  ANNOUNCEMENT INFO.;　, 2-9A
  AUTHOR;　
  
• Effect of electrical property of graphite die on sintering behavior of Spark Plasma Sintering process;　2017/11
  ANNOUNCEMENT INFO.;　JSPM International Conference on Powder and Powder Metallurgy, Kyoto University Clock Tower Centennial Hall, November 6-9, 2017, P-A3-01
  AUTHOR;　Tatsuya Misawa, Yuji Kawakami and Masakazu Kawahara
  
• Control of temperature distribution in sintering die on Multi-Axis current Sintering process;　2017/11
  ANNOUNCEMENT INFO.;　JSPM International Conference on Powder and Powder Metallurgy, Kyoto University Clock Tower Centennial Hall, November 6-9, 2017, P-A3-02
  AUTHOR;　Yuya MAEDA^M, Tatsuya MISAWA and Kenichi SUNAMOTO
  
• 農産物・食品の汚染や品質劣化を防ぐプラズマ殺菌・消毒技術;　2017/10
  ANNOUNCEMENT INFO.;　, 食－１６２３
  AUTHOR;　
  
• 立体形状を持つ大気圧プラズマを用いた低温プラズマ殺菌の殺菌特性;　2017/09
  ANNOUNCEMENT INFO.;　, 2P-Aa38
  AUTHOR;　
  
• Influence of water temperature on stability of three dimensional atmospheric plasma using water dielectric multi layer electrode;　2017/07
  ANNOUNCEMENT INFO.;　XXXIII International Conference on Phenomena in Ionized Gases (ICPIG) at Estoril / Lisbon (Portugal), 9-14 July 2017, P III.49
  AUTHOR;　Tatsuya Misawa
  
• 放電プラズマ焼結における導電性材料・ダイの電気的特性と焼結挙動;　2017/06
  ANNOUNCEMENT INFO.;　, 1-31A
  AUTHOR;　
  
• 放電プラズマ焼結プロセスの焼結容器内部の 電流分布の温度依存性;　2016/12
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• 導電性材料の放電プラズマ焼結における電気的特性と焼結挙動;　2016/12
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• 立体形状に適応する大気圧非平衡プラズマの放電構造;　2016/12
  ANNOUNCEMENT INFO.;　, 30aP11
  AUTHOR;　
  
• 農産物・食品の汚染や品質劣化を防ぐプラズマ殺菌・消毒技術;　2016/12
  ANNOUNCEMENT INFO.;　, 食－９０９（佐賀大学、琉球大学、佐世保工業高等専門学校、大阪府環境農林水産総合研究所）
  AUTHOR;　
  
• Temperature Dependence of Current distribution on Spark Plasma Sintering Process;　2016/11
  ANNOUNCEMENT INFO.;　
  AUTHOR;　Tatsuya Misawa, Yuji Kawakami, Masakazu Kawahara
  
• Behavior of current distribution in the conductive sintering materials on SPS process with high frequency current components;　2016/10
  ANNOUNCEMENT INFO.;　World PM2016 Congress & Exhibition (Congress Centre Hamburg, Hamburg, Germany), Session 44: Spark Plasma Sintering 1
  AUTHOR;　Tatsuya Misawa, Hiroaki Kodera, Yuji Kawakami, Masakazu Kawahara
  
• 大気圧プラズマを用いた農産物の殺菌消毒技術　－プラズマを用いた様々な応用技術－;　2016/09
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• Dependence of Frequency and Electric Conductivity on Current Distribution in SPS Process;　2016/06
  ANNOUNCEMENT INFO.;　International Conference on PROCESSING & MANUFACTUREING OF ADVANCED MATERIALS (THERMEC’2016), MESSE GRAZ, Graz, Austria, E8 June-02 17:00
  AUTHOR;　Tatsuya Misawa, Hiroaki Kodera, Yuji Kawakami, Masakazu Kawahara
  
• Dependence of water temperature on atmospheric discharge using water – dielectric multi – layer electrode;　2013/03
  ANNOUNCEMENT INFO.;　The 20th Annual Meeting 0f IAPS & The 6th International Workshop on Plasma Application and Hybrid Functionally Materials, P-19, PARKROYAL KUALALUMPUR, Malaysia(March 09, 2013).
  AUTHOR;　Tatsuya Misawa, Takayuki Ayabe, Yuusuke Akiyoshi
  
• Influence of Pulsed Current Frequency on Sintering Behavior of SPS Process;　2012/10
  ANNOUNCEMENT INFO.;　Powder Metallurgy World Congress & Exibition (PM2012), 18B-S3-28, Pacifico Yokohama, Yokohama, Japan(October 18, 2012).
  AUTHOR;　Tatsuya Misawa, Hiroaki Kodera, Takashi Enjoji, Tomonori Hirai, Yuji Kawakami, Masakazu Kawahara, Noboru Shikatani, Yasunori Ohtsu
  
• Development of Spark Plasma Sintering Device Using Induction Heating Process;　2012/10
  ANNOUNCEMENT INFO.;　Powder Metallurgy World Congress & Exibition (PM2012), P-T3-43, Pacifico Yokohama, Yokohama, Japan(October 17, 2012).
  AUTHOR;　H. Kodera, T. Misawa, T. Enjoji, T. Hirai, Y. Kawakami, M. Kawahara, N. Shikatani, Y. Ohtsu
  
• Characteristics of atmospheric plasma generated by water-dielectric multi-layer electrode;　2012/09
  ANNOUNCEMENT INFO.;　Thirteenth International Conference on Plasma Surface Engineering (PSE2012), PO2046, Garmisch-Partenkirchen, Germany(September 10–14, 2012).
  AUTHOR;　Tatsuya Misawa, Keiichi Yamamoto, Yuusuke Akiyoshi, Nobuya Hayashi
  
• Inactivation of seed-borne pathogenic fungi using atmospheric gas plasma;　2012/09
  ANNOUNCEMENT INFO.;　First AFSSA Conference,(September 16, 2012).
  AUTHOR;　Terumi Nishioka, Yuichiro Takai, Shinichi Kusakari, Mitsuo Kawaradani, Kiyotsugu Okada, Hideo Tanimoto, Tatsuya Misawa
  
• Stability of atmospheric plasma generated by water-dielectric multi-layer electrode;　2012/09
  ANNOUNCEMENT INFO.;　International Conference on Electronic Materials 2012 (IUMRS-ICEM 2012), C-8-P26-016, PACIFICO Yokohama, Yokohama, Japan(September 23–28, 2012).
  AUTHOR;　 T. Misawa, S. Baba, T. Ayabe, Y. Akiyoshi and N. Hayashi
  
• Property of atmospheric plasma generated by water-dielectric multi-layer electrode;　2012/03
  ANNOUNCEMENT INFO.;　The 18th Annual Meeting of IAPS & The Fifth International Workshop on Plasma Application and Hybrid Functionally Materials, B-4, Howard International House, Taipei (March 9-12, 2012).
  AUTHOR;　Tatsuya Misawa, Takayuki Ayabe, Keiichi Yamamoto, Yuusuke Akiyoshi and Nobuya Hayashi
  
• Discharge characteristic of atmospheric plasma generated using　water-dielectric multi-layer electrode;　2011/11
  ANNOUNCEMENT INFO.;　Proceedings of Plasma Conference 2011, 24G02, Kanazawa Music Hall, Kanazawa city, Ishikawa, JAPAN(November 24, 2011).
  AUTHOR;　Tatsuya Misawa, Keiichi Yamamoto, Yuusuke Akiyoshi, Nobuya Hayashi
  
• Orientation of ceramics using ZnO nano powder sintered by Spark Plasma Sintering Process;　2010/12
  ANNOUNCEMENT INFO.;　Proceedings of 20th MRS-Japan Academic Symposium, Yokohama Port Opening Plaza, Yokohama Media & Communications Center, Hatoba Kaikan, Japan (Dec. 20-21, 2010).
  AUTHOR;　Tatsuya Misawa, Soutarou Ishibashi, Tomonori Hirai, Noboru Shikatani, Yuji Kawakami, Takashi Enjoji, Masakazu Kawahara, Yasunori Ohtsu
  
• リング状ホロー溝電極を用いた高密度容量結合型プラズマ生成;　2010/03
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• リング電極を用いた大気圧容量結合放電プラズマジェット生成とその応用;　2010/03
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• Characteristics of Al-doped ZnO thermoelectric materials using Spark Plasma Sintering Process;　2010/02
  ANNOUNCEMENT INFO.;　Proc. 27th Symp. Plasma Processing, P1-35, Yokohama, P1-35., 197-198
  AUTHOR;　Tatsuya Misawa, Soutarou Ishibashi, Noboru Shikatani, Yuji Kawakami, Takashi Enjoji, Masakazu Kawahara, Yasunori Ohtsu
  
• Production of High-Density Plasma with Plasma-Ring Discharge;　2010/02
  ANNOUNCEMENT INFO.;　Proc. 27th Symp. Plasma Processing, Yokohama, P1-01., 129-130
  AUTHOR;　Y.Ohtsu, H.Urasaki, T.Misawa, H.Fujita
  
• Characteristics of RF Capacitively Coupled Plasma with High-Secondary-Electron-Emission Electrode Materials for Mercury-Free Lamp;　2010/02
  ANNOUNCEMENT INFO.;　Proc. 27th Symp. Plasma Processing, Yokohama, P1-02., 131-132
  AUTHOR;　K.Kabashima, T.Misawa, Y.Ohtsu
  
• Development of Frequency Plasma Sputtering Device for Preparation of High-Temperature Piezoelectric-Sensor Thin Films;　2010/02
  ANNOUNCEMENT INFO.;　Proc. 27th Symp. Plasma Processing, Yokohama, P1-33., 193-194
  AUTHOR;　S.Tanaka, T.Misawa, Y.Ohtsu, M.Akiyama
  
• Preparation of Water-Repellent Thin Film with Low-Electron-Temperature Plasma CVD Using Mixture Gases of C2H2F2 and Ar;　2010/02
  ANNOUNCEMENT INFO.;　Proc. 27th Symp. Plasma Processing, Yokohama, P1-34., 195-196
  AUTHOR;　K.Kihara, Y.Ohtsu, T.Misawa
  
• リング状ホロー放電による容量結合型プラズマの高密度化;　2009/12
  ANNOUNCEMENT INFO.;　, 9-10
  AUTHOR;　
  
• マルチリング電極を用いた大気圧容量結合型放電プラズマジェットの生成;　2009/12
  ANNOUNCEMENT INFO.;　, 110-111
  AUTHOR;　
  
• 酸化亜鉛系熱電材料の開発における放電プラズマ焼結プロセスの役割;　2009/11
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• SPSプロセスを用いたZnOナノ粒子焼結体の配向性に対する内部電流および加圧力の効果;　2009/11
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• 酸化亜鉛系熱電材料の開発における放電プラズマ焼結プロセスの役割;　2009/11
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• リング状ホロー溝電極を用いた高密度容量結合型プラズマの生成;　2009/11
  ANNOUNCEMENT INFO.;　, 19-22
  AUTHOR;　
  
• リング状ホロー電極を用いた容量結合型プラズマ生成に与える溝とガス圧の影響;　2009/11
  ANNOUNCEMENT INFO.;　, 78
  AUTHOR;　
  
• Generation of Al-doped Thermoelectric Materials using Spark Plasma Sintering Method;　2009/09
  ANNOUNCEMENT INFO.;　Abstracts of Seventh Asian-European International Conference on Plasma Surface Engineering (AEPSE 2009), PA2078,P2009-440, Busan, Korea., 349
  AUTHOR;　T. Misawa, N. Shikatani, Y. Kawakami, T. Enjoji and Y. Ohtsu
  
• Production of Dual Frequency Sputtering Plasma for Preparation of Aluminum Nitride Thin Films;　2009/09
  ANNOUNCEMENT INFO.;　Abstract of 16th International Conference of Surface Modification of Materials by Ion Beams, Tokyo.
  AUTHOR;　Y.Ohtsu, K.Hino, T.Misawa, H.Fujita, M.Akiyama and K.Yukimura
  
• Development of high-density radio frequency plasma source with ring-shaped hollow electrode for dry processing;　2009/09
  ANNOUNCEMENT INFO.;　Proc. of 31th International Symposium on Dry process.
  AUTHOR;　Y.Ohtsu, H.Urasaki, T.Misawa and H. Fujita
  
• 無水銀光源のための容量結合プラズマ特性に及ぼす誘電体電極材料の影響;　2009/09
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• リング状ホロー電極を用いた容量結合型プラズマに及ぼす溝構造の影響;　2009/09
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• AlN薄膜合成のための二周波プラズマスパッタリング装置の構築;　2009/09
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• 高密着撥水性薄膜合成のための低電子温度プラズマ装置の構築;　2009/09
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• Microstructure and Thermoelectric Properties of Al-doped ZnO Sintered Body;　2009/08
  ANNOUNCEMENT INFO.;　Abstracts of International Conference on Processing & Manufacturing of Advanced Materials (Thermec’2009), Berlin, Germany., 355
  AUTHOR;　N.Shikatani, T.Misawa, Y.Kawakami, M.Ohta,
  
• リング状溝電極を用いた高密度容量結合型プラズマの生成とその空間分布の均一化;　2009/08
  ANNOUNCEMENT INFO.;　, 25-28
  AUTHOR;　
  
• ZnO系焼結体の熱電特性と微構造;　2009/06
  ANNOUNCEMENT INFO.;　, 29
  AUTHOR;　
  
• パルス通電焼結法による六ホウ化ランタンバルク体の焼結特性;　2009/06
  ANNOUNCEMENT INFO.;　, 170
  AUTHOR;　
  
• リング状ホロー電極を用いた容量結合型プラズマの高密度化;　2009/06
  ANNOUNCEMENT INFO.;　, 41-45
  AUTHOR;　
  
• 放電プラズマ焼結法を用いた酸化亜鉛系熱電材料の開発とプラズマ応用;　2009/04
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• Deposition of Al-doped ZnO thermoelectric thin film using Spark Plasma Sintering Method;　2009/02
  ANNOUNCEMENT INFO.;　Plasma Science Symposium 2009 / The 26th Symposium on Plasma Processing (February 2-4, 2009; Toyota hall, Nagoya University), 248-249
  AUTHOR;　Tatsuya Misawa, Noboru Shikatani, Yuji Kawakami, Takashi Enjoji, Yasunori　Ohtsu
  
• Preparation of water-repellent thin film with C2H2F2/Ar plasma and investigation of its adhesion;　2009/01
  ANNOUNCEMENT INFO.;　The 2nd International Conference on Plasma-Nano-Technology & Science P-05 (January 22, 2009)
  AUTHOR;　N.Wada, T.Misawa, Y.Ohtsu and H.Fujita
  
• Observation of dielectric barrier discharge at various Xe/Ne mixture gas ratios;　2009/01
  ANNOUNCEMENT INFO.;　The 2nd International Conference on Plasma-Nano-Technology & Science P-19 (January 22, 2009)
  AUTHOR;　T.Yamamura, T.Misawa, Y.Ohtsu and H.Fujita
  
• Preparation of aluminum nitride thin film with dual frequency plasma sputtering;　2009/01
  ANNOUNCEMENT INFO.;　The 2nd International Conference on Plasma-Nano-Technology & Science　(January 22, 2009)
  AUTHOR;　K.Hino, T.Misawa, Y.Ohtsu, H.Fujita and M.Akiyama
  
• C2H2F2/Arプラズマを用いた撥水性薄膜合成;　2008/12
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• Xe/Ne混合ガスを用いた誘電体バリヤ放電特性;　2008/12
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• 二周波プラズマスパッタリング法を用いた窒化アルミニウム薄膜の高速合成;　2008/12
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• 放電プラズマ焼結プロセスを用いた焼結試料の配向性に対する試料内部電流の影響;　2008/11
  ANNOUNCEMENT INFO.;　, 129
  AUTHOR;　Tatsuya Misawa, Noboru Shikatani, Yuji Kawakami, Takashi Enjoji, Yasunori　Ohtsu
  
• ZnO-Al系焼結体の熱電特性;　2008/11
  ANNOUNCEMENT INFO.;　, 67
  AUTHOR;　Noboru Shikatani, Yuji Kawakami, Tatsuya Misawa, Michihiro Ohta
  
• 放電プラズマ焼結プロセスにおける試料内部電流と試料内部構造;　2008/11
  ANNOUNCEMENT INFO.;　, 99-104
  AUTHOR;　Tatsuya Misawa, Noboru Shikatani, Yuji Kawakami, Takashi Enjoji, Yasunori　Ohtsu
  
• Time evolution of plasma parameter on shunting arc discharge plasma under the low gas pressure;　2008/09
  ANNOUNCEMENT INFO.;　International Congress on Plasma Physics 2008 Abstracts (September 8-12, 2008; Fukuoka International Congress Center), 184
  AUTHOR;　Tatsuya Misawa, Yasunori Ohtsu
  
• C2H2F2を用いた低電子温度プラズマによる撥水性薄膜合成とその密着性の検討;　2008/09
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• 誘電体バリヤ放電開始電圧に与えるXe/Neガス混合比の影響;　2008/09
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• 二周波プラズマスパッタリングを用いた窒化アルミニウム薄膜の高速合成;　2008/09
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• C2H2F2を用いたプラズマCVD法による撥水性薄膜合成とその密着性の検討;　2008/07
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• 誘電体バリヤ放電に及ぼすXe/Neガス混合比の影響;　2008/07
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• 二周波プラズマスパッタリングによる窒化アルミニウム薄膜の高速合成～アルミニウム薄膜高速化～;　2008/07
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• 放電プラズマ焼結プロセスにおける焼結挙動の試料内部電流の影響;　2008/05
  ANNOUNCEMENT INFO.;　, 172
  AUTHOR;　Tatsuya Misawa, Noboru Shikatani, Yuji Kawakami, Takashi Enjoji, Yasunori　Ohtsu, Hiroharu Fujita
  
• パルス通電焼結法を用いた 酸化亜鉛系セラミックスの焼結における 試料内電流の磁気的計測;　2007/11
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• パルス通電焼結法による 酸化亜鉛系セラミックスの焼結における試料内部電流の効果;　2007/09
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• Laser Observation of Charged Dust Particles in RF Plasma under the Irradiation of Ultraviolet Light;　2007/09
  ANNOUNCEMENT INFO.;　13th International Symposium on Laser-aided Plasma Diagnostics (Hida Hotel Plaza, Takayama, Japan)
  AUTHOR;　T. Misawa
  
• Probe Measurement of Shunting Arc Discharge Plasma under the low gas pressure;　2007/09
  ANNOUNCEMENT INFO.;　The 6th Asian-European International Conference on Plasma Surface Engineering (Yasuragi-Ioujima Nagasaki, Japan)
  AUTHOR;　T. Misawa
  
• パルス電流焼結法における 試料内部電流の磁気プローブを用いた計測;　2007/06
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• 低ガス圧下でのシャンティングアーク放電プラズマのプローブ特性;　2007/01
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• パルス電流焼結法による ZnO系セラミックスの焼結における 試料内部電流の直接計測;　2006/12
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• 低ガス圧下でのシャンティングアーク放電によるカーボンプラズマのプローブ特性;　2006/11
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• Influence of the Internal Current on the Sintering Behavior of ZnO Ceramics Sintered by PCS Method;　2006/09
  ANNOUNCEMENT INFO.;　2006 Powder Metallurgy World Congress (Busan, Korea)
  AUTHOR;　T. Misawa
  
• 低ガス圧下におけるシャンティングアーク放電 プラズマのプローブ特性;　2006/08
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• 紫外線照射によって分極した微粒子による微粒子プラズマの生成;　2006/05
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• パルス電流焼結法を用いた 酸化亜鉛系セラミックスの焼結に対する 試料内部電流の影響;　2006/05
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• 低ガス圧下におけるカーボン電極を用いた シャンティングアーク放電プラズマの放電特性;　2006/03
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• 電子レンジを用いた科学創造性育成のための教材開発;　2006/03
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• 紫外線照射によって非等方的な強結合状態を持つ微粒子雲の生成;　2006/03
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• Behavior of Charged Dust Particles under the Irradiation of Ultraviolet Light;　2006/01
  ANNOUNCEMENT INFO.;　6th International Conference on Reactive Plasmas & 23rd Symposium of Plasma Processing (松島、宮城県)
  AUTHOR;　T. Misawa
  
• Influence of Ultraviolet Light on the Coulomb Coupling between Dust Particles;　2005/06
  ANNOUNCEMENT INFO.;　4th International Conference on the Physics of Dusty Plasmas (Orleans, France)
  AUTHOR;　T. Misawa
  
• リングアンテナによる高周波放電プラズマ中で 捕捉された微粒子雲に対する紫外線照射の影響;　2005/03
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• 紫外線照射によって非等方的な強結合状態を持つ微粒子プラズマの生成;　2005/01
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• 紫外線照射によって非等方的な強結合状態を持つ微粒子プラズマの生成;　2004/11
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• Generation of Carbon Dust Particles in Radio Frequency Discharge Plasmas;　2004/06
  ANNOUNCEMENT INFO.;　7th Asia Pacific Conference on Plasma Science and Technology & 17th Symposium on Plasma Science for Materials (福岡)
  AUTHOR;　T. Misawa
  
• Spatial Profile of Charged Dust Particles in RF Plasma with a Ring-Shaped Antenna;　2003/07
  ANNOUNCEMENT INFO.;　International Conference on Phenomena in Ionized Gases, Greifswald, Germany (July 15-20, 2003).
  AUTHOR;　T. Misawa, S. Inoue, J. Harada, Y. Ohtsu and H. Fujita
  

Application of Intellectual Property Rights

• プラズマ殺菌装置;　2015/10
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• プラズマ殺菌装置;　2015/05
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• 臭素回収方法およびその装置;　2012/05
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• プラズマ生成装置;　2011/11
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  
• 臭素回収方法およびその装置;　2010/10
  ANNOUNCEMENT INFO.;　
  AUTHOR;　
  

Invited Lecture, Special Lecture

• 放電プラズマ焼結プロセスにおける試料・ダイ内部電流の分布と焼結挙動;　2019/10
  ANNOUNCEMENT INFO.;　, 2-56
  AUTHOR;　
  
• Sintering behavior of Spark Plasma Sintering with control of current distribution;　2019/10
  ANNOUNCEMENT INFO.;　SPS 2019, Centre Europeen de la Ceramique, Limoges, France (Invited)
  AUTHOR;　Tatsuya Misawa, Takumi Sakamaki, Kaede Endo, Yuji Kawakami, Masakazu Kawahara
  
• Heterogeneity of sintering temperature in the boundary between different materials and graphite die on Spark Plasma Sintering Process;　2018/08
  ANNOUNCEMENT INFO.;　15th International Symposium on Functionally Graded Materials (ISFGMs 2018) Kitakyushu International Conference Center Kitakyushu Fukuoka, Japan
  AUTHOR;　Tatsuya Misawa, Takumi Sakamaki, Kodai Sakata, Yuji Kawakami, Masakazu Kawahara
  
• Ununiformity of sintering behaviour in the boundary between material and graphite die on Spark Plasma Sintering Process;　2018/07
  ANNOUNCEMENT INFO.;　International Conference on PROCESSING & MANUFACTUREING OF ADVANCED MATERIALS (Thermec'2018), Cite Des Sciences et de l’industrie Paris (CSL), France, July 9-13 2018, B6 July-11 16:40
  AUTHOR;　Tatsuya Misawa, Takumi Sakamaki, Kodai Sakata^M, Yuji Kawakami, Masakazu Kawahara
  
• Influence of electrical property of sintering die on the sintering behavior of Spark Plasma Sintering process;　2017/07
  ANNOUNCEMENT INFO.;　Frontiers in Materials Processing Applications, Research and Technology (FiMPART 2017), Bordeaux convention centre (Congres et Expositions de Bordeaux, France), 2018/7/9-12, Session: J4, Jul-11 16:25, OP2443, Powder Metallurgy
  AUTHOR;　Tatsuya Misawa, Yuji Kawakami, Masakazu Kawahara
  
• Dependence of Frequency and Electric Conductivity on Current Distribution in SPS Process;　2016/06
  ANNOUNCEMENT INFO.;　International Conference on PROCESSING & MANUFACTUREING OF ADVANCED MATERIALS (THERMEC’2016), MESSE GRAZ, Graz, Austria, May 5 - June 3, 2016, E8 June-02 17:00
  AUTHOR;　Tatsuya Misawa, Yuji Kawakami, Masakazu Kawahara
  
• Influence of High Frequency Components of Sintering Current on Spark Plasma Sintering Process;　2015/06
  ANNOUNCEMENT INFO.;　International Conference on Frontiers in Materials Processing, Applications, Research & Technology (FiMPART’15), International Convention Center, Hyderabad, India, June 12-15, 2015
  AUTHOR;　Tatsuya Misawa, Hiroaki Kodera, Yuji Kawakami, Masakazu Kawahara
  
• Influence of frequency of power supply on sintering behavior of Spark Plasma Sintering process;　2014/07
  ANNOUNCEMENT INFO.;　3rd International Workshop on Spark Plasma Sintering, The Espace Vanel, Toulouse, France (Université Toulouse III - Paul Sabatier, CNRS), July 18 2014
  AUTHOR;　Tatsuya Misawa, Hiroaki Kodera, Yuji Kawakami, Masakazu Kawahara
  
• Frequency Dependence of Internal Current Distribution on Spark Plasma　Sintering Process;　2013/12
  ANNOUNCEMENT INFO.;　International Conference on Processing & Manufacturing of Advanced Materials (Thermec’2013), Rio Hotel, Las Vegas, USA, B9 Dec-06
  AUTHOR;　Tatsuya Misawa, Hiroaki Kodera, Yuji Kawakami, Masakazu Kawahara
  
• Independent control of internal current and heating process on spark plasma sintering process;　2011/08
  ANNOUNCEMENT INFO.;　Abstracts of International Conference on Proceeding & Manufacturing of Advanced Materials (THERMEC2011), SESSION 4: Smart Intelligent Materials and Processes IV, SMART-4-5, Hilton Quebec, Quebec City, CANADA (Aug. 2011)
  AUTHOR;　T.Misawa, S.Ishibashi, T.Hirai, N.Shikatani, Y.Kawakami, T.Enjoji, M.Kawahara, Y.Ohtsu
  
• Influence of Internal Pulsed Current on the Sintering Behavior of Pulsed Current Sintering Process;　2009/08
  ANNOUNCEMENT INFO.;　Abstracts of International Conference on Processing & Manufacturing of Advanced Materials (Thermec’2009), Berlin, Germany., 305
  AUTHOR;　T. Misawa, N. Shikatani, Y. Kawakami, T. Enjoji and Y. Ohtsu
  
• 放電プラズマ焼結プロセスにおける焼結試料の構造形成に対する試料内部電流の効果;　2009/06
  ANNOUNCEMENT INFO.;　, 157
  AUTHOR;　
  
• Observation of internal pulsed current flow through the ZnO specimen in the spark plasma sintering method;　2007/11
  ANNOUNCEMENT INFO.;　7th Pacific Rim Conference on Ceramic and Glass Technology (Shanghai, China)
  AUTHOR;　三沢達也