MF研究者総覧

教員活動データベース

詳細

内圧を受けるトリスフェリカルシェルの弾塑性クリープ座屈解析

発表形態：
原著論文
主要業績：
主要業績
単著・共著：
共著
発表年月：
1991年
DOI：
会議属性：
指定なし
査読：
有り
リンク情報：

日本語フィールド

著者：
宮崎 則幸;萩原 世也;上田 貴史;宗像 健
題名：
内圧を受けるトリスフェリカルシェルの弾塑性クリープ座屈解析
発表情報：
圧力技術 巻: 29 号: 5 ページ: 271 - 276
キーワード：
概要：
A torispherical shell is known to buckle with circumferential waves on a knuckle region, when it is subjected to excessive internal pressure. The circumferential waves observed are caused by bifurcation buckling.
In the present study, we performed the elastic-plastic creep buckling analysis of a torispherical shell subjected to internal pressure to examine the possibility of the bifurcation buckling mentioned above under the elevated temperature condition where significant creep deformation occurs. The internal pressure close to the bifurcation buckling pressure obtained from a static bifurcation buckling analysis was applied to a torispherical shell in the present analysis.
In conclusion, the possibility of the bifurcation creep buckling was denied by the following reasons.
(1) The negative circumferential membrane force at a knuckle region which is a trigger for the bifurcation buckling changes to positive due to creep deformation.
(2) The plastic zone existing at the time of 0hr disappears due to the stress redistribution caused by creep deformation.
抄録：

英語フィールド

Author：
MIYAZAKI Noriyuki;HAGIHARA Seiya;UEDA Takashi;MUNAKATA Tsuyoshi
Title：
Elastic-Plastic Creep Buckling Analysis of Torispherical Shell Subjected to Internal Pressure.
Announcement information:
Journal of Japan High Pressure Institute Vol: 29 Issue: 5 Page: 271 - 276
An abstract：
A torispherical shell is known to buckle with circumferential waves on a knuckle region, when it is subjected to excessive internal pressure. The circumferential waves observed are caused by bifurcation buckling.
In the present study, we performed the elastic-plastic creep buckling analysis of a torispherical shell subjected to internal pressure to examine the possibility of the bifurcation buckling mentioned above under the elevated temperature condition where significant creep deformation occurs. The internal pressure close to the bifurcation buckling pressure obtained from a static bifurcation buckling analysis was applied to a torispherical shell in the present analysis.
In conclusion, the possibility of the bifurcation creep buckling was denied by the following reasons.
(1) The negative circumferential membrane force at a knuckle region which is a trigger for the bifurcation buckling changes to positive due to creep deformation.
(2) The plastic zone existing at the time of 0hr disappears due to the stress redistribution caused by creep deformation.

Copyright © MEDIA FUSION Co.,Ltd. All rights reserved.