日本語フィールド
著者：有馬博史（佐大海エネ研），井上利明（久留米工大），小山幸平（佐大海エネ研）題名：
PEEK樹脂膜アルミ伝熱面におけるアンモニアのプール沸騰熱伝達発表情報：第51回日本伝熱シンポジウム, 2013/5/21-23, 浜松 巻: 51 ページ: A132キーワード：
Pool boiling, Ammonia, PEEK resin, Aluminum概要：抄録：The author proposed the aluminum as a material of PHE for OTEC which was using ammonia as a working fluid, because it is light and high thermal conductivity. However, the aluminum has low corrosion resistance against ammonia. Then, the high ammonia resistance by the PEEK polymer coating of PHE plate is expected. In this study, tolerance experiments during three months were performed using aluminum block coated PEEK under pool nucleate boiling of ammonia, in order to clarify the corrosion resistance and heat transfer performance. As a result, the coating surface was changed dramatically and the boiling curve was also changed.英語フィールド
Author：Hirofumi ARIMA, Toshiaki INOUE, Kohei KOYAMATitle：
Heat transfer in pool boiling of ammonia on PEEK resin coating aluminum surfaceAnnouncement information:nhts2014 Vol: 51 Page: A132Keyword：
Pool boiling, Ammonia, PEEK resin, AluminumAn abstract：The author proposed the aluminum as a material of PHE for OTEC which was using ammonia as a working fluid, because it is light and high thermal conductivity. However, the aluminum has low corrosion resistance against ammonia. Then, the high ammonia resistance by the PEEK polymer coating of PHE plate is expected. In this study, tolerance experiments during three months were performed using aluminum block coated PEEK under pool nucleate boiling of ammonia, in order to clarify the corrosion resistance and heat transfer performance. As a result, the coating surface was changed dramatically and the boiling curve was also changed.