MF研究者総覧

教員活動データベース

レーザ干渉計を用いたオゾナイザのガス温度の推定

発表形態:
原著論文
主要業績:
主要業績
単著・共著:
共著
発表年月:
2015年
DOI:
会議属性:
指定なし
査読:
有り
リンク情報:

日本語フィールド

著者:
猪原 哲, 佐藤 三郎 読み: イハラ サトシ,サトウ サブロウ
題名:
レーザ干渉計を用いたオゾナイザのガス温度の推定
発表情報:
レーザ学会誌(レーザー研究) 巻: 43 号: 1 ページ: 36-40
キーワード:
概要:
抄録:
We measured the gas temperature on a surface discharge ozonizer by a Michelson interferometer using a He-Ne laser. The ozonizer has a configuration of a thin dielectric material plate (Al2O3) that is put between a stripe-shaped high voltage electrode and a grounded electrode. In these experiments, oxygen gas with a flow rate of 1.5 l/min was used for ozone generation, and ozone concentrations of 28 and 33g/m3 were obtained at discharge powers of 31 and 57W. The gas temperature was about 50℃, 70℃ at 2.5 mm from the surface of the ozonizer elements. The estimated temperature agreed qualitatively with the results of thermal conduction analysis.

英語フィールド

Author:
Satoshi IHARA and Saburoh SATOH
Title:
Estimation of Gas Temperature in Ozonizer using Laser Interferometry
Announcement information:
Vol: 43 Issue: 1 Page: 36-40
An abstract:
We measured the gas temperature on a surface discharge ozonizer by a Michelson interferometer using a He-Ne laser. The ozonizer has a configuration of a thin dielectric material plate (Al2O3) that is put between a stripe-shaped high voltage electrode and a grounded electrode. In these experiments, oxygen gas with a flow rate of 1.5 l/min was used for ozone generation, and ozone concentrations of 28 and 33g/m3 were obtained at discharge powers of 31 and 57W. The gas temperature was about 50℃, 70℃ at 2.5 mm from the surface of the ozonizer elements. The estimated temperature agreed qualitatively with the results of thermal conduction analysis.


Copyright © MEDIA FUSION Co.,Ltd. All rights reserved.